Osburn 2000 Wood Insert OB02016 Review
Finding a fireplace insert that makes your surroundings warm and relaxing every cold season? Osburn 2000 Wood Insert OB02016 is available for you!
The new standard lowering the fine particulate emission threshold will be conquered by the recent certification of the Osburn 2000 wood-burning stove. This revamped version now offers an incredibly low average particulate emissions rate of only 1.54 g/h, maximum heat output of 75,000 BTU/h, and 77% optimum efficiency. This insert still has a 2.4 ft3 combustion chamber and a 144-CFM variable-speed fan that is strategically positioned to redistribute heat throughout the room.
Designed to receive an optional faceplate that can cover a masonry hearth up to 32 inches (81 cm) high and 50 inches (127 cm) wide. A steel door overlay is available in black or brushed nickel as well as faceplate trims. Look no further, treat yourself to Osburn's legendary quality!
If your installlation requires the use the optional 32" x 50 Cuttable Faceplate (18 GA) only Overlay is Required
NOTE: Shown with required faceplate, faceplate trim, and door overlay (not included). The faceplate, faceplate trim, and door overlay must be purchased to complete this unit.
Required Accessories:
-
Black or brushed nickel door overlay
-
Faceplate kit: Regular (29" x 44") or Large (32" x 50")
-
Black or brushed nickel faceplate trims
Also Available with Forever Flex Liner Kit Osburn 2000 Wood Insert with 5.5"x25' Forever Flex Liner Kit OB02016K
Avail your Osburn 2000 Wood Insert OB02016 Today and you will enjoy the cold moments at your home!
Features
Features:
-
Fuel type: Dry cordwood (16" recommended)
-
Recommended heating area-ft²: 500- 2,100
-
Overall firebox volume-ft³: 2.4
-
EPA loading volume-ft³: 2.02
-
Maximum burn time: 8 h
-
Maximum heat output-dry cordwood: 75.000 BTU/h (22.0 kW)
-
Overall heat output rate : 14,800 BTU/h (4.34 kW) to 28,600 BTU/h (8.38 kW)
-
Average overall efficiency (dry cordwood) : 69% (HHV) 74% (LHV)
-
Optimum overall efficiency: 77%
-
Optimum heat transfer efficiency: 75%
-
Average particulate emissions rate: 1.54 g/h
-
Average CO: 89.4 g/h
Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time, and maximum heat output.
Recommended heating area and maximum burn time may vary subject to location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
As measured per CSA B415.1-10 stack loss method.
- Higher Heating Value of the fuel.
- Lower Heating Value of the fuel.
Performances are based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
Optimum overall efficiency at a specific burn rate (LHV).
The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
This appliance is officially tested and certified by an independent agency.
Carbon monoxide.
Manuals
Manuals:
Is this a right-sized unit for your wood insert? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com to ensure that this wood insert is best suited for your needs.
Specifications
Specifications:
-
Combustion technology: Non-catalytic
-
High-efficiency certified appliance: Yes, EPA 2020 approved
-
Maximum log length: 20"
-
Log positioning: Loading over the width
-
Chimney diameter: 6"
-
Type of chimney: Liner - ULC-S635, CAN/ULC-S640, UL1777
-
Minimum chimney height (feet): 12'
-
Baffle type: C-Cast or equivalent
-
Approved for a mobile home installation: No
-
Shipping Weight: 407 lb (185 kg)
-
Door type: Single, glass with cast iron frame
-
Glass type: Ceramic glass
-
Glass surface – dimensions (Width X Height): 17 1/8" X 10 1/4"
-
Glass air-wash system: Yes
-
Premium Quality Blower Included (CFM): 120
-
Overall dimension: (Height) 23 1/8" (Width) 28 3/8" (Depth) 26 3/8"
-
Door opening – dimension: (Height) 9" (Width) 17 1/2"
-
Firebox – dimension: (Height) 11 7/8" (Width) 21" (Depth) 16 3/4"
-
Firebox lined with refractory bricks for better heat distribution: Yes
-
Stainless-steel secondary-air system improving gas combustion: Yes
-
Adjustable Threaded Legs: Yes
-
Steel thickness – body: 3/16"
-
Steel thickness – top: 5/16"
-
Fireplace Opening- Minumum: (Height) 23 3/8" (Width) 28 7/8" (Depth) 15 3/4"
-
USA standard (emissions): EPA
-
Canadian Standard (emissions): CSA B415.1-10
-
USA standard (safety): UL 1482, UL 737
-
Canadian standard (safety): ULC S628
-
Tested and listed as per applicable standards: By an accredited laboratory (CAN/USA)
-
Warranty: Limited lifetime
Minimum Clearances to Combustibles
Minimum Clearances to Combustibles:
(Data expressed in inches. 1 inch = 25.4 mm)
Canada
- Clearance - top ( measured from the platform on which the appliance is installed) - 84"
- Clearance - Combustible side mantle to unit - 9"
- Clearance - Combustible top mantle to unit - 27"
- Clearance - Combustible side wall to unit - 16"
- Clearance - minimum floor protection in front of the appliance 18"
- Clearance - from the top of the unit to the shelf - 27"
United States
- Clearance - top ( measured from the platform on which the appliance is installed) - 84"
- Clearance - Combustible side mantle to unit - 9"
- Clearance - Combustible top mantle to unit - 27"
- Clearance - Combustible side wall to unit - 16"
- Clearance - from the top of the insert to the shelf - 27"
The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogs, flyers, magazines, and/or websites).
Note: Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
Options and Accessories
Options and Accessories:
32'' X 50'' Cuttable Faceplate (18 GA) - AC01357
- Bridges the gap between the fireplace insert and fireplace perimeter
5" Fresh Air Intake Kit - AC01298
- Recommended to reduce or eliminate negative pressure problems
5'' Fresh Air Intake Register with Airtight Damper - AC01349
-
Allows outside combustion air to feed the appliance
Offset Liner Adapter - AC01214
- Allows your flexible liner to be offset to the rear of an insert outlet.
Osburn Rigid Firescreen - AC01315
- Enhances the crackle of your fire
7 3/16" X 26" Heat Shield for Surround/Shelf - AC01317
- Diverts heat around combustible mantel shelves and surrounds
We are an authorized dealers for every brand we sell!
Our SATISFACTION GUARANTEE and LOWEST PRICE GUARANTEE let you rest easy knowing you'll be taken care of, no matter what happens.
By buying from us you qualify for the full manufacturer warranty, save time and money! We ship directly to your door from the manufacturer's warehouse. Every product is checked for quality assurance and packaged with the utmost care to ensure it arrives in perfect working condition. We ship with only the best carriers including UPS, FedEx, USPS, and trusted freight companies to get your product to you in the fastest time possible. We even offer discounts with most orders just to make your day a little better.
We use encrypted SSL security to ensure your credit card information is 100% protected.
