Empire Direct-Vent Wall Furnace MV Thermostat 35000 BTU DV35SG Review

Delivers room-filling warmth; fits against an outside wall. A push of the button ignites the pilot with a matchless piezo system. Add an optional internal blower for even greater air circulation.

Optional automatic blowers install easily for more even heat distribution. Ideal for bedrooms or studies, wall furnaces add comfort and beauty to any decor. Ideal for bedrooms or studies, wall furnaces add comfort and beauty to any decor

When you need to heat a single room or an entire home, Empire has Direct Vent Furnaces to suit your needs. Empire Direct-Vent Wall Furnaces are specifically designed for areas where flues or chimneys are not available or cannot be used. Empire Direct-Vent heaters have removable front panels for easy cleaning and servicing.

With a Direct-Vent system, there is a positive difference in fuel economy because the outside air is used to support combustion. The air on the inside is warmed as it recirculates around a sealed chamber. This warm air heats the room cleanly and efficiently.

Buy Empire Direct-Vent Wall Furnace MV Thermostat 35000 BTU DV35SG today!

Features:

• DV25SG (24,000 Btu LP and 25,000 Btu Natural) and DV35SG (35,000 Btu)
• Thermostat Included
• Console cabinet mounts on an outside wall
• Quiet operation
• Matchless piezo ignition (heats without electricity)
• Optional automatic blower
• Ideal for family room
• Made in the USA

Manuals:

• Product Brochure
• User's Manual and Installation Instructions

• Due to high temperatures, the appliance should be located out of traffic and away from furniture and draperies.
• Children and adults should be alerted to the hazard of high surface temperature
• and should be kept away to avoid burns or clothing ignition.
• Installation and repair should be done by a qualified service person.
• This series is design certified in accordance with American National Standards Institute
• Z21.86 and the National Standard of Canada

Specifications:

• Color: Cabinet and Front Panels Beige
• Btu Output: 35,000
• Width: 37”
• Depth: 11 1/2”
• Height: 27 3/4”
• Shipping Weight, lb.. (Two Cartons): 101
• Control Options Works with:
• Manual Toggle Switch
• Thermostat Wall Switch
• Remote Control Includes TMV
• Minimum Clearances to Combustibles From Top: 48”
• Minimum Clearances to Combustibles From Top Each Side: 8”
• Bottom of Unit to Floor Covering: 4”
• Type of Gas (State on Order): Natural Gas/Propane
• Iron Pipe Size (N.P.T.): 1/2”
• Wall to Valve Inlet: 4”
• Center of Vent to Valve Inlet Left: 17 11/16”
• Wall Depth Minimum: 4 1/2”
• Wall Depth Maximum See accessories for thicker walls: 13”
• Vent Opening in Wall: 6 1/2” Dia.
• Center of Vent to Nearest Outside Corner of Building or Obstruction: 24”
• Center of Vent from any Opening through which Flue Gases Could Enter a Building: 6”
• Bottom of Vent Above Grade: 12”
• Edge of Vent to Nearest Projecting Surface: 6”
• Vent Projection from Outside Wall: 5”
• Center of Flue to Floor Covering: 19 3/4”
• Safety Controls: Pilot and Main Burners include Automatic Shut-off.
• Warranty: 10-year limited warranty on the combustion chamber. All other parts carry a one-year limited warranty.

Vent Tube Extension Kit Available. Please Contact Empire Parts Department.
This appliance may be installed in an aftermarket permanently located, manufactured
(mobile) home, where not prohibited by state or local codes.

• This convenient wall thermostat puts you in control, allowing you to adjust your gas log settings from an easily accessible wall switch. Empire Comfort Systems makes your life simple with the added luxury of fireplace accessories that improve the quality of your gas log experience.

TDV1 Temperature Wall T-Stat-Digital, High-Efficient Wall Furnace Control Options

• Wall Thermostat, Digital, Wire

Features:

• Type: Digital Wire Wall Thermostat
• Weight: 1.00 lbs

TMV Wall Thermostat-Reed Switch

Features:

• Type: Wall Thermostat - Reed Switch
• Weight: 1.00 lbs

DRB1 Automatic Blower 

• The Empire DRB1 Automatic Blower increases the efficiency of your heater. This model is designed specifically for the models listed below. Blowers take the air warmed by the heater and help circulate it around the room more efficiently, increasing the effectiveness and range of the heater.
• The Empire DRB1 Automatic Blower is the perfect complement to your existing heating system.

Features:

• Type: Blower
• Weight: 8 lbs
• Automatically circulates heated air
• For use with Empire:
• RH25 and RH35 Console Gas Room Heaters
• DV25SG and DV35SG Direct Vent Gas Wall Furnaces

VSK2 Vinyl Siding Kit

• This vinyl siding vent kit installs on virtually any type of home providing a smart clean look to finish off your exterior vent. Its new slim-line look offers a less intrusive view of the outside of your home.
• Includes Siding Kit Only. includes outside wall plate with vent shield. Does not include a vent tube, cap, or wall plate.

Features:

• Type: Vent Kit
• Weight: 2.50 lbs
• Slim Vent Kit
• For Vinyl Siding Horizontal
• Model VSK2: for use with DV25SG and DV35SG By Empire Comfort System

DV822 Vinyl Siding Vent-Kit

• This vent kit installs on a vinyl-sided home. It provides a clean look to finish off your exterior vent. This item is only the Vinyl Siding Vent Kit. It does not include a vent cap.
• The Vinyl Siding Vent Kit is for use with Empire Direct-Vent Wall Furnaces.

Features:

• Type: Siding Vent Kit
• Weight: 5.00 lbs
• Material: Vinyl
  For use with Empire Round Vent Kit DVVK4RE

DVVK4RE Horizontal Vent Kit with Termination Cap

• A termination kit is required to finish off your direct vent fireplace. This termination kit can be used with either a top or rear vent installation with a horizontal exit.

Features:

• Horizontal fireplace direct vent kit
• For walls up to 13 3/4" thick
• Includes:
• one small round horizontal termination cap
• one outside mounting plate
• one 4" diameter flue tube
• one 6 5/8" inlet air tube
• one wall thimble
• one thimble extension

Conversion Kits

Models:

• Empire 17086 Nat to LP Conversion Kit.
• Empire 17087 LP to Nat Conversion Kit.
• Features:
• Type: Conversion Kit
• Model 17086: Converts Natural Gas Unit into Liquid Propane
• Model 17087: Converts Liquid Propane Unit into Natural Gas