Bio Flame Wall Mounted Collection
Bio Flame Prive Wall Mounted Ventless Bioethanol Fireplace – Brushed Stainless Steel
The Bio Flame Prive is a wall-mounted ventless bioethanol fireplace designed to add the warmth, movement, and visual appeal of a real flame without requiring a chimney, vent, gas line, or electrical connection. Its stainless steel construction, brushed stainless steel fascia, and 13-inch ethanol burner create a clean contemporary focal point for residential and commercial spaces.
Producing up to 12,000 BTU per hour (3.5 kW), the Prive is rated by the manufacturer to heat an average indoor area of over 40 m², or approximately 430 ft². The unit uses bioethanol fuel and is designed for wall-mounted installation.
12,000 BTU/hMaximum thermal output
Up to 430 ft²Average indoor heating area
13-Inch BurnerBioethanol burner system
0.7 LitersFuel capacity
Approx. 1 HourListed burn time
34.4 InchesOverall width
55 lbsApproximate weight
No Vent or ElectricityWall-mounted design
What Is the Bio Flame Prive?
The Bio Flame Prive is a wall-mounted, ventless bioethanol fireplace that creates a real flame without a chimney, conventional vent, gas line, or electrical connection. It uses a 13-inch burner and is designed for residential and commercial spaces where a compact contemporary fireplace is appropriate.
The manufacturer lists a maximum thermal output of 12,000 BTU/h (3.5 kW), an average indoor heating area of over 40 m² (approximately 430 ft²), and a minimum room size of 150 sq. ft. per burner.
Key Features
Ventless Real-Flame Design
The Prive creates a real bioethanol flame without requiring a chimney or conventional venting system.
No Gas Line Required
Because the fireplace operates on bioethanol fuel, it does not require connection to a natural gas or propane supply.
No Electricity Required
The Prive does not depend on an electrical connection to produce its flame.
12,000 BTU Heat Output
The 13-inch burner provides a maximum net thermal output of 12,000 BTU/h, equivalent to 3.5 kW.
Up to Approximately 430 ft²
The manufacturer lists an average indoor heating area of over 40 m², or approximately 430 ft².
Stainless Steel Construction
The fireplace uses stainless steel construction with a brushed stainless steel fascia for a contemporary architectural appearance.
Wall-Mounted Format
The wall-mounted design allows the fireplace to become a focal feature without requiring a traditional masonry fireplace opening.
Compact Fuel System
The Prive has a 0.7-liter fuel capacity and a listed consumption rate of 0.70 liters per hour, resulting in an approximate one-hour burn time.
Residential and Commercial Use
Bio Flame positions its wall-mounted fireplaces for homes, offices, and commercial settings, and the Prive specification sheet lists indoor and outdoor application.
Is the Bio Flame Prive Right for Your Project?
Best For
- Homeowners who want a real flame without installing a chimney or vent
- Modern living rooms where a wall-mounted fireplace can act as a visual focal point
- Apartments and condominiums where conventional fireplace infrastructure is unavailable
- Renovations where adding gas lines or electrical connections is undesirable
- Offices and commercial interiors seeking a contemporary real-flame feature
- Hospitality spaces where stainless steel styling complements a modern interior
- Buyers who specifically prefer bioethanol fuel rather than gas, wood, or electric flame technology
Consider Another Fireplace If
- You require a fireplace connected to natural gas or propane
- You want an electric fireplace with powered flame effects
- You need a traditional wood-burning fireplace
- You require a fireplace intended to serve as the sole heating system for an entire home
- Your room does not meet the manufacturer's stated minimum room size of 150 sq. ft. per burner
- You require operating characteristics different from the Prive's approximately one-hour listed burn time
Bio Flame Prive Overview
The Bio Flame Prive is designed for buyers who want the appearance of a real open flame without installing a conventional wood-burning or gas fireplace. Instead of relying on a chimney, gas supply, or electrical connection, the Prive burns bioethanol fuel in a dedicated 13-inch burner.
Its wall-mounted format allows the fireplace to become an architectural feature without requiring a traditional fireplace opening. The manufacturer describes Bio Flame wall-mounted fireplaces as capable of installation in less than 15 minutes without additional utility connections, although actual installation conditions depend on the mounting location and applicable clearance requirements.
The Prive combines a stainless steel firebox with a brushed stainless steel fascia and is manufactured from 304-grade stainless steel according to the product information supplied.
Prive Quick Specifications
| Product Type |
Wall-mounted ventless bioethanol fireplace |
| Fuel Type |
Bioethanol fuel |
| Maximum Heat Output |
12,000 BTU/h / 3.5 kW |
| Average Indoor Heating Area |
Over 40 m² / approximately 430 ft² |
| Minimum Room Size |
150 sq. ft. per burner |
| Burner Size |
13 inches |
| Fuel Capacity |
0.7 L |
| Fuel Consumption |
0.70 L per hour |
| Approximate Burn Time |
1 hour |
| Dimensions |
27.0" H × 34.4" W × 10.8" D (686 × 874 × 275 mm) |
| Approximate Weight |
55 lbs |
| Firebox Construction |
Stainless steel |
| Fascia |
Brushed stainless steel |
| Application |
Indoor and outdoor |
| Venting |
No chimney or vent required |
| Gas Connection |
Not required |
| Electrical Connection |
Not required |
Heating Performance
The Bio Flame Prive produces a maximum net thermal output of 12,000 BTU per hour (3.5 kW). According to the manufacturer specification sheet, this corresponds to an average indoor heating area of more than 40 m², or approximately 430 ft².
The Prive should therefore be considered both a visual fireplace and a source of supplemental heat. Heating performance depends on the room and surrounding installation conditions, so the manufacturer's 430 ft² figure should be treated as an average rather than a guarantee for every space.
Room-size requirement: The manufacturer lists a minimum room size of 150 sq. ft. per burner.
Bioethanol Fuel and Burn Time
The Prive operates on bioethanol fuel. Its 13-inch burner has a listed fuel capacity of 0.7 liters and consumes approximately 0.70 liters per hour.
Based on the manufacturer's specification sheet, the approximate burn time is 1 hour. This operating profile is important for buyers comparing a manual bioethanol fireplace with gas or electric fireplaces designed for longer-duration operation.
| Fuel |
Bioethanol fuel |
| Burner |
13-inch burner |
| Fuel Capacity |
0.7 L |
| Fuel Consumption |
0.70 L/hour |
| Approximate Burn Time |
1 hour |
Installation Requirements
The Bio Flame Prive is designed as a wall-mounted fireplace. Unlike a conventional gas or wood-burning fireplace, it does not require a chimney, vent, gas line, or electrical connection for operation.
The supplied product information states that Bio Flame wall-mounted ethanol fireplaces can be installed in less than 15 minutes without additional connections. Installation time will still depend on the mounting surface, preparation, and site conditions.
Utility Requirements
- No chimney required
- No conventional vent required
- No gas line required
- No electrical connection required for fireplace operation
- Uses bioethanol fuel
Planning Requirements
- Confirm the installation space meets the manufacturer's requirements
- Observe the stated minimum room size of 150 sq. ft. per burner
- Use the actual fireplace when final dimensions are critical
- Reference the manufacturer's clearance and installation instructions before installation
Important dimensional note: Bio Flame states that dimensions may vary by approximately ±2% because of material attributes. The manufacturer recommends using the actual fireplace or burner when making final cut-outs rather than relying exclusively on published dimensions.
Dimensions and Physical Specifications
| Height |
27.0" / 686 mm |
| Width |
34.4" / 874 mm |
| Depth |
10.8" / 275 mm |
| Approximate Weight |
55 lbs |
| Burner Size |
13 inches |
| Construction |
Stainless steel |
| Fascia Finish |
Brushed stainless steel |
Published dimensions are manufacturer specifications. Bio Flame notes that dimensions may vary by approximately ±2%.
Stainless Steel Construction
The supplied product information states that Bio Flame wall-mounted ethanol fireplaces are manufactured entirely from 304-grade stainless steel. The Prive specification sheet identifies stainless steel construction and a brushed stainless steel fascia.
This combination gives the fireplace a clean, contemporary visual profile suitable for modern residential, hospitality, office, and commercial environments.
Indoor and Outdoor Application
The official Prive specification sheet lists the fireplace for indoor and outdoor application. Buyers planning an outdoor installation should still follow the manufacturer's applicable installation and clearance requirements for the chosen location.
Indoor room requirement: The manufacturer specifies a minimum room size of 150 sq. ft. per burner.
Certifications, Testing, and Recognition
CE Approved & Certified
Listed in the supplied product information.
EN 16647 Certified
The supplied product information identifies the Prive as an EN 16647 certified product.
Third-Party Tested
Third-party testing is stated in the supplied product information.
Manufacturer-listed recognition: The Prive specification sheet identifies Bio Flame as a 2010 Vesta Awards winner for Outdoor Hearth Products.
What's Included
The official Prive specification sheet shows the following included accessories:
Lighting Rod
Included accessory shown in the manufacturer's Prive documentation.
Lighter
Included accessory shown in the manufacturer's Prive documentation.
Funnel
Included accessory shown in the manufacturer's Prive documentation.
Complete Technical Specifications
| Brand |
Bio Flame |
| Model |
Prive |
| Collection |
Wall Mounted Collection |
| Product Type |
Ventless wall-mounted bioethanol fireplace |
| Fuel Type |
Bioethanol fuel |
| Maximum Thermal Output |
12,000 BTU/h |
| Metric Thermal Output |
3.5 kW |
| Average Indoor Heating Area |
Over 40 m² / approximately 430 ft² |
| Minimum Room Size |
150 sq. ft. per burner |
| Burner Size |
13 inches |
| Fuel Capacity |
0.7 L |
| Fuel Consumption |
0.70 L/hour |
| Approximate Burn Time |
1 hour |
| Height |
27.0" / 686 mm |
| Width |
34.4" / 874 mm |
| Depth |
10.8" / 275 mm |
| Approximate Weight |
55 lbs |
| Firebox |
Stainless steel construction |
| Material Grade |
304-grade stainless steel according to supplied product information |
| Fascia |
Brushed stainless steel |
| Application |
Indoor and outdoor |
| Venting |
Ventless; no chimney required |
| Gas Connection |
Not required |
| Electrical Connection |
Not required for fireplace operation |
| Certification |
CE Approved & Certified; EN 16647 certified according to supplied product information |
| Testing |
Third-party tested according to supplied product information |
Warranty Information
Warranty information should be verified before publication. The product information supplied for this listing states a 3-year warranty, while the official Prive specification sheet displays Lifetime Warranty. Because the two supplied sources do not match, the final warranty term should be confirmed before presenting one term as definitive.
Is the Bio Flame Prive Right for Your Space?
Choose the Prive when you want a compact wall-mounted fireplace with a genuine bioethanol flame and do not want to install conventional fireplace infrastructure. It is especially relevant to projects where the absence of a chimney, vent, gas connection, or dedicated electrical connection provides a practical installation advantage.
The Prive is also a strong fit for design-led spaces where brushed stainless steel and a contemporary wall-mounted profile are important. Its 12,000 BTU maximum output provides supplemental warmth while the real flame creates the visual character buyers typically seek from a fireplace.
Buyers should pay particular attention to the approximately one-hour listed burn time and the manufacturer's 150 sq. ft. minimum room-size requirement.
Bio Flame Prive FAQs
Does the Bio Flame Prive require a chimney or vent?
No. The Bio Flame Prive is a ventless bioethanol fireplace and does not require a chimney or conventional venting system.
Does the Bio Flame Prive require electricity?
No. The Prive operates using bioethanol fuel and does not require an electrical connection for fireplace operation.
Does the Bio Flame Prive require a gas line?
No. The Prive uses bioethanol fuel rather than natural gas or propane, so a gas connection is not required.
How much heat does the Bio Flame Prive produce?
The Prive has a maximum net thermal output of 12,000 BTU/h (3.5 kW). The manufacturer rates it to heat an average indoor area of over 40 m², or approximately 430 ft².
What is the minimum room size for the Bio Flame Prive?
The manufacturer lists a minimum room size of 150 sq. ft. per burner. Do not select this model for an indoor room that does not meet the stated minimum.
How long does the Bio Flame Prive burn?
The manufacturer lists an approximate burn time of 1 hour with a 0.7-liter fuel capacity and 0.70-liter-per-hour fuel consumption.
What fuel does the Bio Flame Prive use?
The Prive uses bioethanol fuel. It is not designed as a natural gas, propane, wood-burning, or electric fireplace.
Can the Bio Flame Prive be used outdoors?
Yes. The official Prive specification sheet lists both indoor and outdoor application; installation must still follow the manufacturer's applicable requirements for the selected location.
What are the dimensions of the Bio Flame Prive?
The Prive measures approximately 27.0" high × 34.4" wide × 10.8" deep (686 × 874 × 275 mm). Bio Flame states that dimensions may vary by approximately ±2%.
What accessories are included with the Bio Flame Prive?
The manufacturer's specification sheet shows a lighting rod, lighter, and funnel as included accessories.
Product Resources
Review the official manufacturer specification sheet for dimensions, performance data, included accessories, and product information.
Bio Flame Prive at a Glance
The Bio Flame Prive is best suited to buyers who want a contemporary wall-mounted real-flame fireplace without the venting and utility connections associated with conventional fireplaces. Its 13-inch bioethanol burner produces up to 12,000 BTU/h, while the brushed stainless steel fascia gives the unit a clean architectural appearance.
With no chimney, gas line, or electricity required for fireplace operation, the Prive provides a flexible alternative for residential and commercial spaces where traditional fireplace infrastructure is not desired. Before installation, confirm room-size and clearance requirements and use the actual fireplace for final dimensional planning where precise cut-outs are required.
