Empire B-Vent Counterflow Wall Furnace 24V System 55000 BTU FAW55IPX

Empire B-Vent Counterflow Wall Furnace 24V System 55000 BTU Electronic Pilot FAW55IPX Review

Are you looking for total heating comfort for a fraction of the cost of electric heat? Empire B-Vent Counterflow Wall Furnace 24V System 55000 BTU FAW55IPX. Get yours now here at Flame Authority, your Trusted Dealer!

Vented zone heating systems use room air to support combustion and exhaust their flue products to the outdoors via a single pipe.
Mounts anywhere you have access to an existing flue or where you can install a vent run through the roof. A vented zone heating system makes an excellent replacement for an inefficient oil or wood stove. Vented zone heating systems may be installed as the primary heating system. Counterflow wall furnaces circulate warmth at floor level to provide comfort at a fraction of the cost of electric heat. The front panels remove easily for cleaning and servicing. Available in standing pilot with matchless piezo ignition or state-of-the-art electronic ignition.

Note: The thermostat is not included. This unit includes vent components required for complete installation. Factory-supplied vent components must be used. Locally sourced or separately purchased vent components should not be used and may negatively impact the performance of this appliance.

Buy Empire B-Vent Counterflow Wall Furnace 24V System 55000 BTU Electronic Pilot FAW55IPX now. Available here at Flame Authority, your Trusted Dealer!

Features

Features:

• Up to 76% A.F.U.E.
• Choose Standing Pilot or Electronic Intermittent Pilot (saves even more energy)
• Front Panels Remove for Cleaning and Servicing
• Counterflow Blower Circulates Warm Air at Floor Level
• Multi-Room Heating Capacity with Optional Outlet Kits
• Control Options: Manual; Toggle Switch; Thermostat; Wall Switch; or Remote Control
• Made in USA

Manuals

Manuals:

• Product Brochure for Empire B-Vent Counterflow Wall Furnace 24V System 55000 BTU FAW55IPX
• Owners Manual & Installation Instructions fpr Empire B-Vent Counterflow Wall Furnace 24V System 55000 BTU FAW55IPX

Need assistance? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com to get the best-suited Wall Furnaces for your needs

Specifications

Specifications:

• Color Cabinet and Front Panels: Beige
• Btu: Input 55,000
• Blower Output Cu.Ft./Min: 400
• Width: 16”
• Depth: 11 5/16”
• Height: 82 3/8”
• Shipping Weight: 135 lbs
• Works with Manual; Toggle Switch; Thermostat; Wall Switch;
• or Remote Control: Yes
• Minimum Clearances to Combustibles From Top (To Ceiling): 7 1/2”
• Minimum Clearances to Combustibles From Each Side (To Nearest Adjacent Sidewall): 4” without Register 18” with (SOR1)
• Bottom of Unit to Wood Floor: Zero
• Center of Vent Connector Opening to Combustibles: 1 9/16”
• Depth Unit May Be Recessed: 4”
• Type of Gas (State on Order): Natural Gas/Propane
• Iron Pipe Size (N.P.T.): 1/2”
• Wall to Valve Inlet: 6 1/2”
• Center of Heater to Center of 1/2” Inlet Elbow: 3”
• Floor Covering to Valve Inlet: 3 3/4”
• Size of Flue Collar: 4” Oval
• Size of Flue with Oval-to-Round Adapter: 4” Round
• Minimum Vent Opening in Ceiling For Oval Type “B” Flue Pipe: 4 1/2” x 9 1/4”
• For Round Type “B” Flue Pipe: 6 1/2” Diameter
• Safety Controls: Pilot and Main Burners Include Automatic Shut-off
• Warranty: The combustion chamber carries a 10-year limited warranty. All other parts carry a 1-year limited warranty

Options and Accessories

Options and Accessories

TRW Wireless Wall Thermostat

• This convenient wall thermostat puts you in control, allowing you to adjust your gas log settings from an easily accessible wall switch. Empire Comfort Systems makes your life simple with the added luxury of fireplace accessories that improve the quality of your gas log experience.

T24V 24-Volt Wall Thermostat Direct-Vent Wall Furnace Accessory

• Thermostats make a heating appliance more efficient, more precise, and easier to control. That's the concept behind this Empire 24-Volt Wall Thermostat, too. It takes your Empire High-Efficiency Direct Vent Wall Furnace and makes it a more accurate and effective heating tool in your home. Get everything you want to out of your favorite appliance by adding this simple thermostat to the mix

SOK1 10" Side Outlet Kit Direct-Vent Counterflow Wall Furnace Accessory

• For both direct vent and conventional vent counterflow wall furnaces, this side outlet kit allows heat to disperse from the side of the furnace cabinet. It does require the side outlet register (SOR-1 sold separately) to redirect the heat flow.

ROK1 10" Rear Outlet Kit Direct Vent Counterflow Furnace Accessory

• Empire knows that one of the biggest frustrations encountered by individuals that are trying to install a heating device into their home is the almost overwhelming number of add ons that need to be purchased and then installed. Their Direct Vent Counterflow Furnace 10 Inch Rear Outlet Kit is designed to be easily installed and immensely helpful in the process of trying to facilitate your furnace as it tries to keep you and your home warm during the winter.

SOR1 Side Outlet Register Direct-Vent Counterflow Wall Furnace Accessory

Features:

• Type: Register
• Side: Outlet Register
• Fits DVC-35SPP, DVC-35IP, DV-55SPP and DV-55IP

 Vent Enclosure

• DV651: This 14 Inch Vent Enclosure, for the FAW-55-SPP and FAW-55-IP Counterflow Wall Furnaces, covers the vent from the top of the FAW-55 to the ceiling. This accessory covers a spanned height up to 14".
  
• DV665: This 24 Inch Vent Enclosure, for the FAW-55-IP and FAW-55-SPP Counterflow Wall Furnace, covers the venting from the top of the unit to the ceiling. This accessory covers a spanned height up to 24" and is provides a finished look to your system.
  
• DV666: A vent enclosure covers the space above your heater. This 36" vent enclosure is for use with the FAW-55 Wall Furnace. It covers the vent from the top of the unit to the ceiling for a finished look. This accessory covers a spanned height of up to 36".
  

Oval to Round Flue Adapter

• The Empire DV-648 is an oval to round flue adapter. It accepts a 4" oval flue collar and converts it to a 4" round flue vent. This transition allows for additional 4" round piping to be added easily.