Empire B-Vent Floor Furnace 65000 BTU 7088X Review

Are you looking to upgrade your home heating or don’t have a duct system? Empires' Floor Furnace is a cost-effective and simple solution. The Empire Floor Furnace needs no electricity to operate and starts with a matchless push-button piezo ignition.

Vented zone heating systems use room air to support combustion and exhaust their flue products to the outdoors via a single pipe.

Mounts anywhere you have access to an existing flue or where you can install a vent run through the roof. A vented zone heating system makes an excellent replacement for an inefficient oil or wood stove.

Vented zone heating systems may be installed as the primary heating system.

This is America’s most popular floor furnace and needs no electricity to operate. With its whole-house heating capability, you will be in total comfort for a fraction of the cost of electric heat.

Buy Empire B-Vent Floor Furnace 65000 BTU 7088X today!

Features:

• Temperature Control: Millivolt Wall Thermostat
  
• Ignition System: Matchless Piezo
• Safety Control: The pilot and main burner are equipped with an Automatic Shut-Off.
• Total warmth for a fraction of the cost of electric heat
• Piezo Matchless Ignition (eliminating the need for matches)
• Whole-House heating capability
• Heats without electricity. Of all heating sources available, the gas heats an area cleanly, efficiently, and for less than half the cost of electricity. Gas heat also continues to function in the event of a power outage.

Manuals:

• Product Brochure
• Installation Instructions

Need assistance? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com

Specifications:

• Register Color: Tan
• Btu Input: 65,000
• Register Length & Width: 36” x 32”
• Casing Length & Width: 34” x 30”
• Overall Length Including Diverter: 45 1/4”
• Floor Opening: Length & Width: 34 5/16” x 30 5/16” Height 25 3/4”
• Shipping Weight, Lbs. (Two Cartons): 152
• Works with Manual; Toggle Switch; Thermostat; Wall Switch; or Remote Control Yes
• Minimum Clearances to Combustibles From Each Side to Nearest Wall: 6”
• Minimum Clearances to Combustibles From  Bottom of Unit for Air: 6”
• Minimum Clearances to Combustibles From Draft Diverter and Vent Connector: 6”
• Minimum Clearances to Combustibles From Two Adjoining Sides to Walls: 18”
• Gas Inlet Type of Gas (State on Order): Natural Gas or Propane
• Iron Pipe Size (N.P.T.): 1/2”
• Inlet to Floor: 6 3/16”
• Floor to Top of Diverter Shield: 4 1/2”
• Center of Flue to Floor Covering: 13”
• Size of Flue Collar: 4” Dia
• Safety Controls: Pilot and Main burners include automatic shut-off temperature limit controls, flood pan, and debris pan
• Warranty: Combustion Chambers carry a 10-yr limited warranty. All other parts carry 1-year limited warranty

The flue pipe diameter must be as large as the flue collar on the draft diverter and run as directly as possible to the chimney
at least 1/4” rise per foot of run, properly supported by metal straps, and enter the chimney so the end of the flue pipe is
flush with the inner wall of the chimney. Any flue pipe passing through walls and roof must be a “B” Type vent. The chimney
must extend at least two feet above the roof and any object or building within 10 feet of the chimney. The flue pipe must
NOT have any open tees or be connected to the chimney of an existing fireplace.

Need assistance? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com

TRW Wireless Remote Wall Thermostat

• This convenient wall thermostat puts you in control, allowing you to adjust your gas log settings from an easily accessible wall switch. Empire Comfort Systems makes your life simple with the added luxury of fireplace accessories that improve the quality of your gas log experience.

TMV Wall Thermostat-Reed Switch

Features:

• Weight: 1.00 lbs
• For use with your Empire High-Efficiency PVS18 and PVS35 Ultra Saver90 Plus Heating Systems

TDV1 Empire Temperature Wall T-Stat-Digital, High-Efficient Wall Furnace

Features:

• Type: Digital Wire Wall Thermostat
• Weight: 1.00 lbs
• For use with your: Empire High-Efficiency PVS18 and PVS35 UltraSaver90 Plus Heating Systems.