Empire Gravity Wall Furnace MV 35000 BTU GWT35W Review

Are you looking for total heating comfort for a fraction of the cost of electric heat? Check this Empire Gravity Wall 35000 BTU Furnace MV GWT35W. Order yours now here at Flame Authority, your Trutsed Dealer!

According to the US Environmental Protection Agency, heating with any gas appliance generates far less particulate pollution compared to heating with any other common fuel. The worst polluter, a wood fireplace, generates 28 pounds of particulates (measuring 2.5 microns or more) for every million Btu of fuel input. Heating with gas generates a tiny fraction of that (just 0.0083 pounds) for every million Btu input. Compared to an EPA-certified wood stove, gas heat still generates less than 1 percent of the particulate pollution. And gas produces less than 2 percent of the pollution emitted by a pellet stove. The Gravity Wall Furnace features in-shot burners that light instantly and burn cleanly and quietly.

Note: 

• Due to high temperatures, the appliance should be located out of traffic and away from furniture and draperies.
• Children and adults should be alerted to the hazard of high surface temperature and should be kept away to avoid burns or clothing ignition.
• Installation and repair should be done by a qualified service person.

Buy Empire Gravity Wall Furnace MV 35000 BTU GWT35W today. Available here at Flame Authority, your Trusted Dealer!

Features

Features:

• State-of-the-Art Technology for Better Fuel Efficiency
• Thermostat not included
• Common Size Retrofits Easily
• GWT25W/35W Furnace Recesses into Wall or Mounts Flush with Optional GWTW2
• Total Comfort for a Fraction of the Cost of Electric Heat
• Optional Blower Available
• Made in the USA
• Units do not come with thermostats
• One blower may be purchased for each side.
• When the GWTW2W Out-of-the-Wall kit is used, the GWTR1W Rear Register kit cannot be used.

Manuals

Manuals:

• Product Brochure for Empire Gravity Wall 35000 BTU Furnace MV GWT35W
• User's Manual and Installation Instructions for Empire Gravity Wall 35000 BTU Furnace MV GWT35W

Need assistance? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com to get the best-suited Wall Furnaces for your needs.

Specifications

Specifications:

• Color Cabinet and Front Panels: White
• Btu Input: 35,000
• Width: 16”
• Depth: 6”
• Height: 66 1/8”
• Height with Optional Blower Kit: 71 7/8”
• Shipping Weight, lb.: 86
• Works with:
• Manual Toggle Switch
• Thermostat; Wall Switch
• Remote Control
• Minimum Clearances to Combustibles From Top: 12”
• Minimum Clearances to Combustibles From Each Side: 4”
• Bottom of Unit to Floor Covering: 1 1/2”
• Type of Gas (State on Order): Natural Gas/Liquid Propane
• Iron Pipe Size (N.P.T.): 1/2”
• Safety Controls: Pilot and Main Burners Include Automatic Shut-off

Options & Accessories

Options & Accessories:

TRW Wireless Remote Wall Thermostat

• This convenient wall thermostat puts you in control, allowing you to adjust your gas log settings from an easily accessible wall switch. Empire Comfort Systems makes your life simple with the added luxury of fireplace accessories that improve the quality of your gas log experience.

TDV1 Temperature Wall Thermostat-Digital

Features:

• Type: Digital Wire Wall Thermostat
• Weight: 1.00 lbs

TMV Wall Thermostat-Reed Switch

Features:

• Type: Wall Thermostat - Reed Switch
• Weight: 1.00 lbs

GWRBT Remote Bulb Thermostat

• Thermostats are a great addition to any heater or furnace. The thermostat allows you to accurately monitor the heat output of your heating appliance, then adjust it more precisely to fit the needs of your home or space. This model is designed exclusively for Empire gravity-vented wall furnaces.

Features:

• Model: GWRBT
• Type: Thermostat
• Remote Bulb Millivolt Thermostat

GWTB2W Automatic Blower for B-Vent Gravity Wall Furnace

• The Empire GWTB2 Automatic Gas Furnace Blower - For Gravity-Vented Wall Furnaces increases the efficiency of a heater. This model is designed specifically for the model of heater listed. Blowers take the air warmed by the heater and help circulate it around the room more efficiently, increasing the effectiveness and range of the heater.

Features:

• Model: GWTB2W
• Type: Blower
• Finish: Powder Coated
• Automatic gas furnace blower
• Improves air circulation and distribution
• Fits all of Empire's Gravity-Vented Wall Furnaces

GWTR1W Rear Register Kit for B-Vent Gravity Wall Furnace

• Use of a rear register on your gravity vented furnace will allow you to heat a rear adjoining room with a single heater. In order to use the rear register for heating an adjacent room, the heater must be recessed into a wall.
• It is for use with Empire GWT-25W and GWT-35W Gravity Vented Wall Furnaces. It is in white to match your furnace.

Features:

• Model: GWTR1W
• Type: Register Kit
• Color: White
• Rear Register Kit

GWTW2W Out-of-Wall Installation Kit for B-Vent Gravity Wall Furnace

• With this out-of-the-wall installation kit, you can now install your Empire Gravity Vented wall furnace flush against a wall rather than in the wall. The out-of-the-wall installation kit can be positioned against the wall with the base being flush against it.

Features:

• Model: GWTW2W
• Type: Installation Kit
• Color: White
• Out Of Wall Installation Kit
• For use with GWT-25 and GWT-35

Conversion Kit

Features:

• Type: Conversion Kit
• Model 17090: For use with GWT35WNAT Converts Natural Gas Unit into Liquid Propane
• Model 17091: For use with GWT35WLP Converts Liquid Propane Unit into Natural Gas