Empire High-Efficient Direct-Vent Wall Furnace 40000 BTU DV40E Review

Are you looking for a highly-efficient wall furnace heater? Whether you need to heat a single room or an entire home, Empire has Direct-Vent Furnaces to suit your needs. Specifically designed for areas where flues or chimneys are not available or cannot be used. Removable front panels for easy cleaning and servicing.

Zone heating – using a gas-fired system in the room where you need the heat – is the most cost-effective way to improve the energy efficiency of a home undergoing remodeling or weatherization upgrades.

Almost any gas system can heat your home for a fraction of the cost of electric heat, but advanced technology drives these clean-burning wall furnaces to more than 80% efficiency (AFUE).

Empire’s High-Efficient Direct-Vent Wall Furnaces are available in sizes to fit most home applications. The 20,000 Btu DV-20E is ideal for maintaining a comfortable temperature in a basement or small family room. Empire offers the only high-efficient systems to exceed 40,000
Btu. The 40,000 Btu DV-40E and 55,000 Btu DV-55E are perfect for heating large family rooms, offices, apartments, or even entire homes – up to 2,000 square feet. Your dealer can help you select the appropriate Empire heater to suit your home and your local climate.
All three models come in LP or Natural Gas. Your dealer can convert the gas types if needed, using the included conversion kit.

Quiet, efficient blowers (350 cfm for the DV-20E and DV-40E, 400 cfm for the DV-55E) help circulate the warm air throughout the room.

These features deliver greater energy savings for a quicker return on your heating investment than with any conventional system.

Buy Empire High-Efficient Direct-Vent Wall Furnace 40000 BTU DV40E today!

Features:

• State-of-the-Art Technology: Ensures Exceptional
• Fuel-Efficient
• Electronic Thermistor Thermostat Maintains
• Temperature Range
• Standard Wall Thermostat Hook-up Accepts Any
• 24-Volt Wall Thermostat – Including Efficient
• Programmable Thermostats (purchased separately)
• Total Comfort for a Fraction of the Cost of Electric Heat
• Sealed Combustion Chamber Maintains Indoor Air Quality
• Discreet Vent Termination minimizes disruptions
  to home’s exterior
• Filtered Air System
• Standard Unit Vents Through a Wall up to 10 inches deep and up to 32 inches with the
• DVT-2 accessory kit
• Extended Horizontal and Vertical Vent Run
• Accessories for 20,000 and 40,000 Btu Wall
• Furnaces allow up to 15 feet of venting
• Built-in Blower Enhances Heat Distribution for Added Comfort
• Hot Surface Ignition Ensures Quiet Starts and
• Saves Gas – Up To $20 Per Month
• Three Btu Sizes to Heat Any Space
• Peace of Mind Safety Features Built into Furnace
• Mobile Home Certified

Manuals:

• Product Brochure
• User's Manual and Installation Instructions

Specifications:

• Color Cabinet and Front Panels: Beige
• Btu Input: 40,000
• Btu Output: 32,600
• Width: 37”
• Depth: 15 3/4”
• Height: 26”
• Shipping Weight, lb.. (Two Cartons): 135
• Electronic Control: Yes
• Blower, tangential type, one speed: 350 cfm
• Minimum Clearances to Combustibles From Top: 10”
• Minimum Clearances to Combustibles From Top Left Side: 3”
• Right Side* *Note: 10” Right Side Clearance Suggested for Serviceability to Right Side Panel Area: 3”
• Bottom of Unit to Floor Covering: 0”
• Type of Gas (State on Order): Natural Gas/Propane
• Iron Pipe Size (N.P.T.): 1/2”
• Wall Depth Minimum: 4 1/2”
• Wall Depth Maximum: See accessories for thicker walls 13”
• Vent Opening in Wall: 3 1/2” Dia.
• 15’ with 2 Elbows: Yes
• 10’ with 3 Elbows: Yes
• Safety Controls: Automatic Shut-off for Main Burner
• Over Temperature: Safety Limit Switch
• Warranty: Combustion Chamber carries a 10-year limited warranty
• All Other Components (Except Remote Controls, Thermostats, Accessories and Replacement Parts) carry a 3-year
• Limited warranty with a 2-year limited labor warranty
• Remote Controls, Thermostats, Accessories, and Parts carry a One-Year limited parts warranty

TRW Wireless Remote Wall Thermostat

• This convenient wall thermostat puts you in control, allowing you to adjust your gas log settings from an easily accessible wall switch. Empire Comfort Systems makes your life simple with the added luxury of fireplace accessories that improve the quality of your gas log experience.

TDV1 Temperature Wall Thermostat Digital

• Wall Thermostat, Digital, Wire

Features:

• Type: Digital Wire Wall Thermostat
• Weight: 1.00 lbs
• For use with your Empire High-Efficiency PVS18 and PVS35 UltraSaver90 Plus Heating Systems

DVT2 Extended Vent Termination

• The Empire DVT-2 intake/exhaust extension kit replaces the standard vent assembly (which only runs 10"). It is for wall thicknesses of up to 32".

Features:

• Type: Extended Vent Termination
• Weight: 11 lbs
• Fits: DV-20E, DV-40E, DV-55E Direct Vent Wall Furnaces
• Direct-Vent Wall Furnaces Accessory

DVP1  14"Floor Pad

• A floor pad for your heater or furnace serves several different purposes. It will provide a safety layer of insulation between your heating appliance and the floor, it will protect your floor from the weight of the appliance, and it will give things an overall more complete look.

Features:

• Type: Floor Pad
• Dimensions: 36" W x 14" D x 1/2" H
• Weight: 10 lbs
• Fits: DV-20E, DV-40E, DV-55E Direct Vent Wall Furnaces
• Direct-Vent Wall Furnaces Accessory

54" Intake/Exhaust Extension Kit without elbows for Extended Vent Runs

• Extending the vent run in you Empire direct vent wall furnace takes the right parts. This kit features a 54-inch intake and exhaust system as well as two elbows for easy installation. Safety first is the general rule for all heating systems, so taking shortcuts is definitely not the answer. If you need a longer ventilation system to maximize efficiency, be sure to get exactly what is needed. This extension kit is definitely affordable and well worth the peace of mind you will have knowing your system is installed correctly.

54" DVE1 Intake/Exhaust Extension-Kit w/ 2 Elbows for Extended Vent Runs

• Planning an extended vent run for your Empire Direct Vent Wall Furnace? This Empire Wall Furnace Intake/Exhaust Extension Kit will help you vent your furnace safely and conveniently.
• Extending the vent run in you Empire direct vent wall furnace takes the right parts. This kit features a 54-inch intake and exhaust system as well as two elbows for easy installation. Safety first is the general rule for all heating systems, so taking shortcuts is definitely not the answer. If you need a longer ventilation system to maximize efficiency, be sure to get exactly what is needed. This extension kit is definitely affordable and well worth the peace of mind you will have knowing your system is installed correctly.

T24V 24-Volt Wall Thermostat

• Thermostats make a heating appliance more efficient, more precise, and easier to control. That's the concept behind this Empire 24-Volt Wall Thermostat, too. It takes your Empire High-Efficiency Direct Vent Wall Furnace and makes it a more accurate and effective heating tool in your home. Get everything you want to out of your favorite appliance by adding this simple thermostat to the mix.