Osburn Horizon Wood Fireplace OB04010 Review

Searching for one of the best wood fireplace to get the best warm feeling during the cold season? Osburn Horizon Wood Fireplace OB04010 is available for you!

This wood fireplace offers peace of mind due to the combination of energy efficiency and clean heating. A simple solution; its clean design suits any type of decor.

Large fireplace. Behind its large glass door, the 4.28 cubic foot combustion chamber can hold an impressive 60 lbs of wood.

Low emissions. This energy-efficient fireplace complies with the EPA’s clean-air standards (only 1.6 g/hr of emissions) in particular through the intelligent air control mechanism is a patented design that optimizes combustion quality.

High efficiency. The Horizon fireplace is capable of heating large spaces and burns for 10 hours.

NOTE: Requires the addition of Faceplate,Brick Panels, Anchor Plate for connecting chimney to the fireplace

Required Accessories:

• Prairie-style faceplate
• Classic moulded refractory brick panels

Also Available with chimney, please visit here Osburn Horizon Wood Fireplace w/4 lengths of 8"x36" Chimney OB04010K

Check one of the best wood fireplace Osburn Horizon Wood Fireplace OB04010 Today and you will feel comfort and relaxation during the cold moments at your home!

Features:

• Fuel type: Dry cordwood (16" recommended)
• Recommended heating area-ft²:  1,000 - 2,800
• Overall firebox volume-ft³: 4.28
• EPA loading volume-ft³: 4.28
• Maximum burn time:  11 h
• Maximum heat output-dry cordwood: 95,000 BTU/h (27.8 kW)
• Overall heat output rate : 16,900 BTU/h (5.0 kW) to 43,000 BTU/h (12.6 kW)
• Average overall efficiency (dry cordwood) : 64% (HHV) 69% (LHV)
• Optimum overall efficiency: 70%
• Optimum heat transfer efficiency: 69%
• Average particulate emissions rate:  1.6 g/h
• Average CO:  159.0 g/h

Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time, and maximum heat output.

Recommended heating area and maximum burn time may vary subject to location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

As measured per CSA B415.1-10 stack loss method.

• Higher Heating Value of the fuel.
• Lower Heating Value of the fuel.

Performances are based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

Optimum overall efficiency at a specific burn rate (LHV).

The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

This appliance is officially tested and certified by an independent agency.

Carbon monoxide.

Manuals:

• Installation and Owner's Manual for Osburn Horizon Wood Fireplace OB04010
• Specifications for Osburn Horizon Wood Fireplace OB04010
• Install/Reference Guide for Osburn Horizon Wood Fireplace OB04010
• Faceplate Installation and Instructions for Osburn Horizon Wood Fireplace OB04010

Is this a right-sized unit for your Wood Fireplace? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com to ensure that this Wood Fireplace is best suited for your needs. 

Specifications:

• Combustion technology: Non-catalytic
• High-efficiency certified appliance: Yes, EPA 2020 approved
• Maximum log length: 25"
• Log positioning: Loading over the width
• Chimney diameter: 8"
• Flue outlet diameter: 8"
• Type of chimney: CAN/ULC S629, UL103 HT(2100 F)
• Minimum chimney height (feet): 15'
• Baffle type: C-Cast or equivalent
• Approved for a mobile home installation: No
• Shipping Weight: 560lb (254 kg)
• Door type: Double, glass with cast iron frame
• Glass type: Ceramic glass
• Glass surface – dimensions (Width X Height): 29 3/4"  X 13 1/2"
• Glass air-wash system: Yes
• Premium Quality Blower Included (CFM): 176
• Overall dimension: (Height)  43 3/8" (Width) 50 3/4" (Depth) 31 3/4"
• Door opening – dimension: (Height) 12 3/4" (Width) 33"
• Firebox – dimension: (Height) 17" (Width) 25 3/8" (Depth) 17 7/8"
• Moulded Refractory Bricks: Yes
• Stainless-steel secondary-air system improving gas combustion: Yes
• USA standard (emissions): EPA/ ASTM WK47329
  
• Canadian Standard (emissions): CSA B415.1-10
• USA standard (safety): UL 127
• Canadian standard (safety): ULC S610
• Tested and listed as per applicable standards: By an accredited laboratory (CAN/USA)
• Warranty: Limited lifetime

Minimum clearances to combustibles:

(Data expressed in inches. 1 inch = 25.4 mm)

Canada

• Clearance - top (measured from the platform on which the appliance is installed) - 84"
• Clearance - Combustible side mantle to unit - 8"
• Clearance - Side Wall - 24"

United States

• Clearance - top (measured from the platform on which the appliance is installed) - 84"
• Clearance - Combustible side mantle to unit - 8"
• Clearance - Side Wall- 24"

The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogs, flyers, magazines, and/or websites).

Note: Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Options and Accessories:

5'' Fresh Air Intake Register with Airtight Damper - AC01349

• Allows outside combustion air to feed the appliance