Summerset RFR-24DK 24-Inch Deluxe Outdoor Rated Kegerator – No Tap, 6.6 Cu. Ft.

Product Summary

The Summerset RFR-24DK is a 24-inch built-in kegerator with 6.6 cubic feet of refrigerated keg storage. It is UL rated for outdoor use and features a #304 stainless steel door and handle, electronic temperature controls, a digital display, LED interior lighting, auto defrost, front ventilation, and a reversible door.

This model is best suited to buyers who want an outdoor kitchen kegerator but prefer to select their tap configuration separately. The appliance does not include a tap tower or dispense kit. Summerset identifies the RFR-TAP-1 single-tap kit and RFR-TAP-2 double-tap kit as separately sold options.

Outdoor Draft Beverage Storage With a Customizable Tap Setup

The RFR-24DK provides refrigerated keg storage for outdoor entertaining spaces without locking the buyer into a preconfigured tap tower. This no-tap format is useful when an outdoor kitchen design calls for a particular tower style, a single or double faucet configuration, or a countertop-mounted installation planned separately from the appliance.

A digital electronic temperature controller allows the cabinet to be adjusted from 32°F to 50°F, with the factory setting listed as 36°F. The interior LED light improves visibility when loading or checking the cabinet, while automatic defrosting reduces routine frost management under normal operating conditions.

Because this is a front-venting appliance, cooling air must be able to enter and exit through the front grille without obstruction. The unit may be incorporated into an outdoor kitchen enclosure when installed according to the manufacturer's ventilation, electrical, leveling, and ambient-temperature instructions.

Key Features and Benefits

Who Is the Summerset RFR-24DK Best For?

Supported Keg Configurations

According to the supplied product specifications, the 6.6-cubic-foot cabinet can accommodate the following keg arrangements:

Summerset RFR-24DK Specifications

Installation Information

The RFR-24DK must be installed on a flat, stable, level surface capable of supporting the appliance when fully loaded. Use two or more people to move and install the unit, and keep it upright during transportation and placement whenever possible.

1. Allow the unit to stand upright before startup.
   After transportation, leave the appliance upright for approximately 24 hours before connecting it to power. This helps reduce the risk of cooling-system malfunction caused by handling.
2. Keep the front ventilation grille unobstructed.
   The appliance is front venting. Do not cover or restrict the front air inlet and outlet when installing the unit in cabinetry.
3. Install within the recommended ambient range.
   The manufacturer recommends an ambient temperature between 50°F and 109.4°F. Operation outside this range may cause temperature fluctuation or prevent the appliance from reaching the selected setting.
4. Keep the unit away from high heat.
   Do not place the kegerator directly beside grills, ovens, heaters, or other heat-producing appliances. Direct sunlight can also increase cooling demand.
5. Use a properly grounded electrical outlet.
   Connect the appliance to a properly installed grounded three-prong outlet. The manual also instructs the installer to use a Ground Fault Interrupter and follow applicable electrical codes.
6. Do not remove the grounding prong.
   Never cut or remove the third grounding prong, and do not use a two-prong grounding adapter.
7. Use a dedicated electrical connection.
   The appliance should be connected to its own properly rated outlet. Do not use an outlet controlled by a wall switch or pull chain.
8. Level the appliance.
   Adjust the leveling components until the cabinet is stable and the door aligns and seals correctly.
9. Allow initial cool-down time.
   After connecting the appliance to power, allow approximately three to four hours of cooling before installing a keg.
10. Protect and insulate the beer line.
    When a beer line passes through an open countertop or outdoor kitchen cavity, surround it with an insulated sleeve or pipe. This helps limit cold-air loss and keeps the line chilled to reduce foamy pours.

Why Beer-Line Insulation Matters

An outdoor kitchen often requires the beverage line to pass from the refrigerated cabinet through a countertop opening to the tap tower. If that opening remains unsealed, cold cabinet air can escape while warm ambient air enters. The exposed section of line may also warm between the cabinet and faucet.

The manufacturer recommends using a PVC sleeve or insulated pipe around the beer line where it travels through the island or countertop. Proper insulation helps maintain cabinet efficiency, keeps the line colder, and reduces the risk of excessive foam or inconsistent dispensing.

Temperature Control and Operation

Cleaning and Maintenance

• Turn off and unplug the appliance before cleaning or servicing.
• Remove the keg and dispense components before cleaning the interior.
• Clean interior surfaces with lukewarm water and a mild baking-soda solution.
• Clean the exterior cabinet with warm water and mild liquid detergent.
• Rinse and dry stainless steel surfaces with a clean, soft cloth.
• Do not use steel wool or a steel brush on the stainless steel.
• Do not use chloride-based products to clean the stainless steel.
• Keep chlorine, pool chemicals, construction dust, lime, and other caustic materials away from the appliance.
• Dust the front grille and rear of the appliance approximately twice per year with the power disconnected.
• Avoid overloading the cabinet or placing items against the rear wall, as this can restrict internal airflow.
• Minimize prolonged door openings to support stable temperature and efficient operation.

What's Included?

Compatible Tap Kits

The official manual identifies the following separately sold tap-kit options. No accessory links have been added because none were supplied.

Product Manual

Summerset RFR-24DK FAQs