Superior Emberwood Split 30" Vent-Free Gas Logs LNF30ES
The Superior Emberwood Split 30" Vent-Free Gas Logs LNF30ES combine a substantial 30-inch cast refractory split-wood presentation with Superior's Nature-Flame burner system for tall natural yellow flames, a flickering ember bed, and traditional fireplace styling. The LNF30ES uses an approved 24-inch Nature-Flame/NF burner and provides up to 39,000 BTU, depending on the selected fuel and control configuration.
Before You Buy
Verify These First
- Your usable firebox provides at least 33" front width × 25" rear width × 19" height × 15" depth.
- You understand that the 30" LNF30ES uses an approved 24" Nature-Flame/NF burner.
- Your burner is one of the specifically approved NF24/NATUREFLAME24 models.
- You have selected the correct Natural Gas or Liquid Propane configuration.
- You have selected the appropriate millivolt or electronic control configuration.
- Your intended vent-free or vented installation satisfies manufacturer requirements and applicable codes.
Do Not Assume
- That a 30" log set requires a 30" burner.
- That any 24" burner is compatible with LNF30ES.
- That Natural Gas and Liquid Propane configurations are interchangeable.
- That minimum firebox dimensions alone confirm installation suitability.
- That the 24" burner, optional controls, or damper clamp are automatically included.
- That individual logs or ember media can be repositioned outside the approved arrangement.
Emberwood Split 30" Overview
The Emberwood Split LNF30ES is designed to provide the visual scale of a larger split-firewood arrangement while operating with Superior's approved 24-inch Nature-Flame burner platform.
The concrete cast refractory logs reproduce wood-grain texture, high-definition bark, exposed split surfaces, irregular edges, and realistic coloration. The larger 30-inch arrangement creates a substantial traditional firewood presentation for fireplaces that meet the required dimensions.
The Nature-Flame pan burner adds tall natural yellow flames, random flame movement, and a flickering ember bed, while the grate styling reinforces the appearance of a conventional wood-burning fireplace.
Superior Emberwood Split LNF30ES at a Glance
Vent-Free Gas Log Set
Single Sided / Front-View
Concrete / Cast Refractory
Natural Gas or Liquid Propane
Millivolt or Electronic
43593110794
Firebox Fit & Burner Compatibility
Correct product selection requires three separate checks: the 30-inch log-set size, the required 24-inch burner family, and the usable firebox dimensions.
Minimum Firebox Dimensions
| Requirement | LNF30ES Requirement |
|---|---|
| Log Size | 30" |
| Burner Size | 24" |
| Minimum Front Width | 33" |
| Minimum Rear Width | 25" |
| Minimum Height | 19" |
| Minimum Depth | 15" |
Approved LNF30ES Burner Models
NATUREFLAME24MN
NF24MN
NATUREFLAME24EN
NF24EN
NATUREFLAME24MP
NF24MP
NATUREFLAME24EP
NF24EP
Key Emberwood Split & Nature-Flame Features
A larger log arrangement designed for fireplaces that satisfy the required usable dimensions.
Detailed wood grain, bark texture, split surfaces, and irregular firewood characteristics create a realistic appearance.
The approved burner platform produces random flame movement around the log arrangement.
Ember material creates glow and additional visual depth beneath the logs.
Nature-Flame models are heater rated with 99% heat efficiency according to the supplied manufacturer literature.
Natural Gas configurations provide a maximum input of 39,000 BTU.
Engineered Log & Ember Placement
The LNF30ES logs form a complete engineered arrangement rather than a collection of interchangeable decorative pieces. Each log must occupy its specified position on the approved burner to create the intended arrangement and flame presentation.
The manufacturer also specifies the correct position of ember material around the Nature-Flame burner.
Fuel, Control & BTU Configuration
The approved 24-inch Nature-Flame burner family paired with LNF30ES is available in separate Natural Gas and Liquid Propane configurations with millivolt or electronic controls.
Natural Gas
Approved Natural Gas configurations operate from 28,000 to 39,000 BTU with either millivolt or electronic controls.
Liquid Propane
Approved Liquid Propane configurations operate from 25,000 to 36,000 BTU with either millivolt or electronic controls.
Millivolt Control
Millivolt configurations are remote ready for approved optional remote and wall controls.
Electronic Control
Electronic configurations include an EcoFlow touchscreen remote according to the supplied manufacturer literature. The remote provides Manual and Thermostat modes, On/Off operation, and three flame-height settings.
30" Nature-Flame Configuration BTU Ratings
| Control Configuration | Natural Gas | Liquid Propane |
|---|---|---|
| Millivolt | 39,000–28,000 BTU | 36,000–25,000 BTU |
| Electronic | 39,000–28,000 BTU | 36,000–25,000 BTU |
Vent-Free & Vented Applications
Vent-Free Operation
The Nature-Flame Emberwood Split system is primarily classified as a vent-free fireplace gas log system.
Vent-free operation depends on the selected configuration, fireplace, room conditions, combustion and ventilation requirements, and applicable codes.
Vented Operation
The manufacturer also lists the Nature-Flame series for appropriate vented fireplace applications.
For an applicable vented installation, a damper clamp is required and sold separately.
Available Control Accessories
Control compatibility depends on the selected Nature-Flame burner configuration. The links below are the manufacturer control references provided in the original product content.
Installation & Safety Requirements
The LNF30ES should not be treated as a decorative log set that can simply be placed into any existing fireplace. Correct installation requires verification of the approved 24-inch burner, firebox dimensions, fuel configuration, gas supply, clearances, log placement, ember placement, combustion and ventilation requirements, and applicable codes.
The Emberwood Split placement instructions supplement the applicable Nature-Flame burner instructions. Read and follow the burner instructions in their entirety.
Required Practices
- Read the complete burner and log-placement instructions.
- Confirm the correct Natural Gas or Liquid Propane configuration.
- Use LNF30ES only with the approved 24-inch Nature-Flame/NF burner models.
- Position every log exactly according to the manufacturer's instructions.
- Keep burner ports unobstructed.
- Keep the fireplace off and cold during installation or repositioning.
- Allow logs adequate cooling time before handling.
- Install any required safety screen, guard, or barrier before operation.
- Follow all applicable local codes and manufacturer requirements.
Prohibited or Incorrect Practices
- Installing LNF30ES on an unapproved burner.
- Using a 30-inch burner simply because the logs are 30 inches.
- Modifying or arbitrarily rearranging the logs.
- Using LNF30ES as a source of individual replacement logs.
- Placing ember material over burner ports.
- Installing or repositioning logs while the fireplace is hot.
- Using components not specifically approved for the appliance.
What's Included?
1 complete LNF30ES 30-inch engineered log arrangement.
1 set of applicable installation and log-placement instructions.
Complete-Set Requirement
The manufacturer identifies the LNF30ES as a complete log set. It must not be used as a source of individual replacement logs.
If another log arrangement is already installed on the compatible burner, remove the complete existing set before installing the new LNF30ES set. Do not mix individual LNF30ES logs with another log set or an unapproved arrangement.
Superior Emberwood Split LNF30ES Specifications
| Product | |
|---|---|
| Brand | Superior Fireplaces |
| Product | Emberwood Split |
| Model | LNF30ES |
| Product Identifier | 43593110794 |
| Series | Nature-Flame |
| Product Category | Fireplace Log Sets |
| Product Type | Vent-Free Gas Logs |
| Vent Type | Vent Free |
| Style | Single Sided / Front-View |
| Construction & Sizing | |
| Log Size | 30" |
| Burner Size | 24" |
| Log Material | Concrete / Cast Refractory |
| Fuel & Performance | |
| Fuel Options | Natural Gas or Liquid Propane, depending on selected configuration |
| Maximum Input | Up to 39,000 BTU, depending on configuration |
| Natural Gas Input | 39,000–28,000 BTU |
| Liquid Propane Input | 36,000–25,000 BTU |
| Control Options | Millivolt or Electronic |
| Minimum Firebox Dimensions | |
| Front Width | 33" |
| Rear Width | 25" |
| Height | 19" |
| Depth | 15" |
| Warranty | |
| Warranty | 5-Year Limited Warranty |
Manufacturer Manuals & Technical Resources
Review the applicable manufacturer documentation for product specifications, burner compatibility, controls, log placement, installation requirements, and operating instructions before installation.
Flame Authority Product Guidance
The Superior Emberwood Split 30" LNF30ES is suited to projects requiring a larger 30-inch split-wood visual presentation while using Superior's approved 24-inch Nature-Flame/NF burner family.
The critical sizing distinction is that 30" refers to the log-set presentation, while the required burner size is 24". The usable firebox must provide at least 33" front width, 25" rear width, 19" height, and 15" depth.
This product is not appropriate as a universal 30-inch replacement log set. Confirm the exact burner model, fuel configuration, control system, firebox dimensions, venting application, log placement, ember placement, clearances, and professional installation requirements before purchase.
Superior Emberwood Split LNF30ES FAQs
What size fireplace does the Emberwood Split LNF30ES require?
The minimum firebox dimensions are 33" front width × 25" rear width × 19" height × 15" depth. The installation must also satisfy all applicable clearance and manufacturer requirements.
What size burner does the 30" LNF30ES use?
The 30-inch LNF30ES uses an approved 24-inch Nature-Flame/NF burner. Do not choose a 30-inch burner based only on the log-set size.
Which burners are compatible with the LNF30ES?
LNF30ES is approved for the specified NATUREFLAME24 and NF24 Natural Gas and Propane millivolt/electronic burner models. Do not install it on another burner.
Can the same LNF30ES configuration operate on Natural Gas and Liquid Propane?
No. Natural Gas and Liquid Propane require separate fuel-specific burner configurations. Select the model that matches the installation's fuel supply.
How many BTUs does the 30" Emberwood Split configuration produce?
Natural Gas configurations operate from 28,000 to 39,000 BTU, while Liquid Propane configurations operate from 25,000 to 36,000 BTU. Confirm the exact burner configuration before ordering.
Does the LNF30ES include a remote control?
Millivolt burner configurations are remote ready for approved optional controls, while electronic configurations include an EcoFlow touchscreen remote according to the supplied manufacturer literature.
Can the LNF30ES be used in a vented fireplace?
Yes, in an appropriate vented fireplace application installed according to manufacturer requirements. A damper clamp is required and sold separately.
Can individual LNF30ES logs be replaced, rearranged, or modified?
No. LNF30ES is a complete engineered log set and must be installed in the manufacturer-specified arrangement without modification.
Final Before-Order Checklist
Confirm
- Model: LNF30ES.
- Product identifier: 43593110794.
- You need a 30-inch log presentation.
- You understand that the required burner family is 24 inches.
- The 33" front × 25" rear × 19" high × 15" deep minimum firebox dimensions are satisfied.
- The burner is a manufacturer-approved NATUREFLAME24/NF24 model.
- The correct Natural Gas or Liquid Propane version is selected.
- The correct millivolt or electronic control configuration is selected.
- The applicable BTU range is understood.
- Included versus optional components are confirmed.
- The intended vent-free or vented application is permitted.
- Qualified installation requirements can be met.
Avoid These Ordering Errors
- Ordering a 30-inch burner because the log set is 30 inches.
- Ordering by log-set size without checking the exact approved burner model.
- Using fireplace exterior dimensions instead of usable firebox dimensions.
- Ordering the wrong fuel configuration.
- Assuming every control configuration includes identical remote equipment.
- Assuming the burner or damper clamp is included.
- Mixing LNF30ES logs with another log set.
- Changing the approved log or ember placement.
