Superior Highridge Birch 30" Nature-Flame Vent-Free Gas Log Set LNF30HB
The Superior Highridge Birch 30" Nature-Flame Vent-Free Gas Log Set LNF30HB creates a wider birch-style fireplace presentation using detailed concrete cast refractory logs and Superior's Nature-Flame pan burner system. The 30-inch log set pairs with an approved 24-inch Nature-Flame burner to produce tall natural-yellow flames, varied flame movement, and a flickering ember bed. Natural Gas configurations operate from 28,000–39,000 BTU/hr, while Propane/LP configurations operate from 25,000–36,000 BTU/hr.
Before You Buy
Verify These First
- Your usable firebox measures at least 33" front width × 25" rear width × 19" height × 15" depth.
- You understand that the 30" LNF30HB log set uses a compatible 24" Nature-Flame burner.
- The burner is one of the approved Nature-Flame 24 / NF24 models.
- You have selected the correct Natural Gas or Propane/LP configuration.
- You have selected the appropriate millivolt or electronic control system.
- The intended vent-free or vented installation satisfies the applicable Superior requirements.
Do Not Assume
- That a 30" log set uses a 30" burner.
- That any 24" gas-log burner is compatible.
- That log length alone determines fireplace suitability.
- That Natural Gas and Propane/LP configurations are interchangeable.
- That millivolt models include the same controls as electronic models.
- That the burner or damper clamp is automatically included.
- That individual logs can be rearranged or substituted.
Highridge Birch 30" Overview
The Highridge Birch 30" is designed for larger qualifying fireplaces where a broader birch-style log presentation is desired while retaining the Nature-Flame platform's vent-free heating and flame presentation.
The concrete cast refractory logs reproduce recognizable birch wood-grain texture, bark character, coloration, and lighter birch-style markings. At 30 inches, this is the largest Highridge Birch log size documented in the supplied Nature-Flame range, which also includes 18" and 24" configurations.
Superior's Nature-Flame pan burner produces tall natural-yellow flames, random flame movement, and a flickering ember bed, while the wood-burning-style grate supports the appearance of a traditional wood fire.
Superior Highridge Birch LNF30HB at a Glance
Vent-Free Gas Log Set
Highridge Birch
Concrete / Cast Refractory
Natural Gas or Propane/LP
Millivolt or Electronic
43593110824
Firebox Fit & Burner Compatibility
The 30-inch log-set size, the 24-inch burner requirement, and the usable firebox dimensions must all be checked independently before ordering.
Minimum Firebox Dimensions
| Firebox Measurement | Minimum Required |
|---|---|
| Front Width | 33" |
| Rear Width | 25" |
| Height | 19" |
| Depth | 15" |
Why Does the 30" Highridge Birch Use a 24" Burner?
Superior specifies the LNF30HB as a 30" log set paired with a 24" Nature-Flame burner. The published 30-inch log configuration does not call for a 30-inch burner.
This distinction is especially important when replacing an existing log set, selecting a new burner, or checking compatibility with an existing Nature-Flame system.
Approved Nature-Flame Burner References
NATUREFLAME24MN
NF24MN
NATUREFLAME24MP
NF24MP
NATUREFLAME24EN
NF24EN
NATUREFLAME24EP
NF24EP
Key Highridge Birch & Nature-Flame Features
The largest Highridge Birch log size documented in the supplied Nature-Flame range.
Detailed birch-style wood grain, bark character, coloration, and distinctive markings.
The approved burner creates random flame movement and tall natural-yellow flames.
The ember effect creates glow and visual depth beneath the larger birch arrangement.
Nature-Flame models are heater rated at 99% heating efficiency.
The system is intended for supplemental heating and should be installed and operated according to Superior instructions.
LNF30HB Highridge Birch Log Placement
The LNF30HB logs must be installed exactly as specified by Superior. They should not be modified or rearranged according to personal preference.
The supplied source notes that the 24" and 30" Highridge Birch sets use a dedicated placement sequence that differs from the 18" configuration. The instructions identify the proper positions for the rear log, right log, right-front log, middle crossover log, left-top log, and related components.
Fuel, Control & BTU Configuration
The LNF30HB uses the same documented 24-inch Nature-Flame burner size as the 24-inch Highridge Birch configuration, which is why the supplied BTU ranges are the same for those two log sizes.
Natural Gas
Natural Gas configurations operate from 28,000 to 39,000 BTU/hr.
Propane / LP
Propane/LP configurations operate from 25,000 to 36,000 BTU/hr.
Millivolt Control
The millivolt Nature-Flame configuration is remote ready for compatible optional remote and wall-mounted controls.
Electronic Control
The electronic configuration includes the EcoFlow Touch Screen Multi-Function Remote with Manual and Thermostat operating modes, On/Off control, and three flame-height settings.
Highridge Birch 30" BTU Ratings
| Control | Fuel | Input Rating |
|---|---|---|
| Millivolt | Natural Gas | 28,000–39,000 BTU/hr |
| Millivolt | Propane/LP | 25,000–36,000 BTU/hr |
| Electronic | Natural Gas | 28,000–39,000 BTU/hr |
| Electronic | Propane/LP | 25,000–36,000 BTU/hr |
Vent-Free & Vented Installation
Vent-Free Operation
The Superior Nature-Flame series is designed for vent-free operation.
During approved vent-free operation, the appliance does not rely on conventional chimney venting. Adequate combustion and ventilation air must still be provided according to the applicable installation manual.
Vented Operation
The Nature-Flame series is also listed for qualifying vented fireplace applications.
For an applicable vented installation, a damper clamp is required to maintain the necessary permanent flue opening. The damper clamp is sold separately.
Compatible Controls
Control compatibility depends on the selected Nature-Flame burner and control configuration. Confirm compatibility before ordering optional controls.
| Control | Application |
|---|---|
| RCKIT4001 | On/Off Remote for compatible millivolt models |
| TRC | Thermostat On/Off Remote for compatible millivolt models |
| GWMT1 | Wall-Mount Thermostat Control Kit |
| EcoFlow Touch Screen Multi-Function Remote | Included with applicable electronic models |
Installation, Replacement & Safety Requirements
Before selecting the LNF30HB configuration, verify the log set, burner, fuel type, control system, fireplace dimensions, and installation requirements.
Verify Before Installation
- 30" Highridge Birch log size.
- Compatible 24" Nature-Flame burner.
- Correct Natural Gas or Propane/LP burner configuration.
- Correct millivolt or electronic control configuration.
- Minimum 33" front firebox width.
- Minimum 25" rear firebox width.
- Minimum 19" firebox height.
- Minimum 15" firebox depth.
- Required fireplace clearances.
- Adequate combustion and ventilation air.
- Applicable vent-free or vented requirements.
- Correct LNF30HB log placement.
- Applicable codes and installation requirements.
Do Not
- Install LNF30HB on an unapproved burner.
- Assume a 30" burner is required.
- Modify or freely rearrange the logs.
- Use LNF30HB as individual replacement logs for an unrelated set.
- Place ember material over burner ports.
- Begin log installation while the fireplace is operating or hot.
- Operate without replacing any required safety screen, guard, or barrier removed during service.
Replacement Log Set Compatibility
Superior identifies the LNF30HB as a complete log set. It is not intended to be used as a collection of individual replacement logs for an unrelated log arrangement.
If replacing an existing set, confirm that the current burner is one of the approved Nature-Flame 24 models before ordering LNF30HB.
The fireplace must be off and cold before beginning log installation. Logs can remain hot after operation, so allow adequate cooling time before handling.
Heating performance and flame appearance can vary with elevation, fuel type, home design and insulation, ceiling height, accessories, and appliance location.
Superior Highridge Birch LNF30HB Specifications
| Product | |
|---|---|
| Brand | Superior Fireplaces |
| Series | Nature-Flame |
| Model | LNF30HB |
| Product Number | 43593110824 |
| Log Style | Highridge Birch |
| Product Type | Vent-Free Gas Log Set |
| Construction & Size | |
| Log Size | 30" |
| Compatible Burner Size | 24" |
| Log Material | Concrete / Cast Refractory |
| Fuel, Controls & Performance | |
| Fuel Options | Natural Gas or Propane/LP |
| Control Options | Millivolt or Electronic |
| Natural Gas Input | 28,000–39,000 BTU/hr |
| Propane/LP Input | 25,000–36,000 BTU/hr |
| Heating Efficiency | 99% |
| Vented Application | Yes, with required damper clamp sold separately |
| Minimum Firebox Dimensions | |
| Front Width | 33" |
| Rear Width | 25" |
| Height | 19" |
| Depth | 15" |
| Warranty | |
| Warranty | 5-Year Limited Warranty |
Manufacturer Manuals & Technical Resources
Review the documentation applicable to the selected burner, fuel, and control configuration before installation, operation, service, or log placement.
Flame Authority Product Guidance
The Superior Highridge Birch 30" LNF30HB is suited to larger qualifying fireplaces where a wide birch-style log presentation is desired while using Superior's approved 24-inch Nature-Flame burner platform.
The most important sizing distinction is that the 30" designation refers to the log set, while the compatible burner size is 24". The usable firebox must provide at least 33" front width, 25" rear width, 19" height, and 15" depth.
Do not select the product by log size alone. Burner model, fuel configuration, control type, fireplace dimensions, venting application, log placement, combustion and ventilation requirements, and qualified installation should all be verified before purchase.
Superior Highridge Birch LNF30HB FAQs
What size fireplace is required for the Superior Highridge Birch 30"?
The usable firebox must be at least 33" front width × 25" rear width × 19" height × 15" depth. All four minimum dimensions must be satisfied.
Does the Superior Highridge Birch 30" use a 30" burner?
No. LNF30HB is a 30" log set designed for a compatible 24" Nature-Flame burner. A 30" burner is not specified for this log set.
Which burners are compatible with LNF30HB?
The supplied content identifies approved Nature-Flame 24 / NF24 Natural Gas and Propane, millivolt and electronic burner references. Do not install LNF30HB on an unapproved burner.
How many BTUs does the Superior Highridge Birch 30" produce?
Natural Gas configurations are rated at 28,000–39,000 BTU/hr, while Propane/LP configurations are rated at 25,000–36,000 BTU/hr.
Should I choose millivolt or electronic controls?
Choose millivolt for a remote-ready configuration using compatible optional controls. Choose electronic if you want the included EcoFlow touchscreen remote with Manual/Thermostat modes and three flame-height settings.
Can the Highridge Birch 30" be used in a vented fireplace?
Yes, in a qualifying vented application. A damper clamp is required for the applicable vented installation and is sold separately.
Can I use LNF30HB as individual replacement logs?
No. Superior identifies LNF30HB as a complete log set. If replacing another log set, verify that the existing burner is an approved Nature-Flame 24 model.
Can I rearrange the LNF30HB Highridge Birch logs?
No. Install the logs only in the positions specified in Superior's Highridge Birch placement instructions. Do not modify the logs or alter the prescribed arrangement.
Final Before-Order Checklist
Confirm
- Model: LNF30HB.
- Product number: 43593110824.
- You want the 30" Highridge Birch log presentation.
- You understand the compatible burner size is 24".
- The usable firebox satisfies all four minimum dimensions.
- The burner is an approved Nature-Flame 24 / NF24 model.
- The correct Natural Gas or Propane/LP version is selected.
- The correct millivolt or electronic control configuration is selected.
- The applicable BTU range is understood.
- Optional versus included controls are understood.
- The intended vent-free or vented installation is appropriate.
- Required combustion and ventilation conditions can be met.
- Qualified installation requirements can be met.
Avoid These Ordering Errors
- Ordering a 30" burner because the log set is 30".
- Assuming any 24" gas-log burner is compatible.
- Using exterior fireplace dimensions instead of usable interior dimensions.
- Ordering the wrong fuel configuration.
- Assuming optional millivolt controls are included.
- Assuming the damper clamp is included for vented operation.
- Using LNF30HB as individual replacement logs for another set.
- Changing the approved LNF30HB log or ember arrangement.
