Osburn Horizon Wood Fireplace w/4 lengths of 8"x36" Chimney OB04010K Review
Are you looking for the greatest wood fireplace to keep you warm during the winter? You can get an Osburn Horizon Wood Fireplace with 4 lengths of 8"x36" Chimney OB04010K!
This wood fireplace offers peace of mind due to the combination of energy efficiency and clean heating. A simple solution; its clean design suits any type of decor.
Large fireplace. Behind its large glass door, the 4.28 cubic foot combustion chamber can hold an impressive 60 lbs of wood.
Low emissions. This energy-efficient fireplace complies with the EPA’s clean-air standards (only 1.6 g/hr of emissions) in particular through the intelligent air control mechanism is a patented design that optimizes combustion quality.
High efficiency. The Horizon fireplace is capable of heating large spaces and burns for 10 hours.
NOTE: Requires the addition of Faceplate,Brick Panels, Anchor Plate for connecting chimney to the fireplace
Required Accessories:
- Prairie-style faceplate
- Classic moulded refractory brick panels
Also Available with chimney, please visit here Osburn Horizon Wood Fireplace OB04010
Check one of the best wood fireplace Osburn Horizon Wood Fireplace w/4 lengths of 8"x36" Chimney OB04010K Today and you will feel comfort and relaxation during the cold moments at your home!
Features
Features:
-
Fuel type: Dry cordwood (16" recommended)
-
Recommended heating area-ft²: 1,000 - 2,800
-
Overall firebox volume-ft³: 4.28
-
EPA loading volume-ft³: 4.28
-
Maximum burn time: 11 h
-
Maximum heat output-dry cordwood: 95,000 BTU/h (27.8 kW)
-
Overall heat output rate : 16,900 BTU/h (5.0 kW) to 43,000 BTU/h (12.6 kW)
-
Average overall efficiency (dry cordwood) : 64% (HHV) 69% (LHV)
-
Optimum overall efficiency: 70%
-
Optimum heat transfer efficiency: 69%
-
Average particulate emissions rate: 1.6 g/h
-
Average CO: 159.0 g/h
Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time, and maximum heat output.
Recommended heating area and maximum burn time may vary subject to location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
As measured per CSA B415.1-10 stack loss method.
- Higher Heating Value of the fuel.
- Lower Heating Value of the fuel.
Performances are based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
Optimum overall efficiency at a specific burn rate (LHV).
The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
This appliance is officially tested and certified by an independent agency.
Carbon monoxide.
Manuals
Manuals:
Is this a right-sized unit for your Wood Fireplace? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com to ensure that this Wood Fireplace is best suited for your needs.
Specifications
Specifications:
-
Combustion technology: Non-catalytic
-
High-efficiency certified appliance: Yes, EPA 2020 approved
-
Maximum log length: 25"
-
Log positioning: Loading over the width
-
Chimney diameter: 8"
-
Flue outlet diameter: 8"
-
Type of chimney: CAN/ULC S629, UL103 HT(2100 F)
-
Minimum chimney height (feet): 15'
-
Baffle type: C-Cast or equivalent
-
Approved for a mobile home installation: No
-
Shipping Weight: 560lb (254 kg)
-
Door type: Double, glass with cast iron frame
-
Glass type: Ceramic glass
-
Glass surface – dimensions (Width X Height): 29 3/4" X 13 1/2"
-
Glass air-wash system: Yes
-
Premium Quality Blower Included (CFM): 176
-
Overall dimension: (Height) 43 3/8" (Width) 50 3/4" (Depth) 31 3/4"
-
Door opening – dimension: (Height) 12 3/4" (Width) 33"
-
Firebox – dimension: (Height) 17" (Width) 25 3/8" (Depth) 17 7/8"
-
Moulded Refractory Bricks: Yes
-
Stainless-steel secondary-air system improving gas combustion: Yes
-
USA standard (emissions): EPA/ ASTM WK47329
-
Canadian Standard (emissions): CSA B415.1-10
-
USA standard (safety): UL 127
-
Canadian standard (safety): ULC S610
-
Tested and listed as per applicable standards: By an accredited laboratory (CAN/USA)
-
Warranty: Limited lifetime
Minimum clearances to combustibles
Minimum clearances to combustibles:
(Data expressed in inches. 1 inch = 25.4 mm)
Canada
- Clearance - top (measured from the platform on which the appliance is installed) - 84"
- Clearance - Combustible side mantle to unit - 8"
- Clearance - Side Wall - 24"
United States
- Clearance - top (measured from the platform on which the appliance is installed) - 84"
- Clearance - Combustible side mantle to unit - 8"
- Clearance - Side Wall- 24"
The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogs, flyers, magazines, and/or websites).
Note: Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
Options and Accessories
Options and Accessories:
5'' Fresh Air Intake Register with Airtight Damper - AC01349
- Allows outside combustion air to feed the appliance
6" X 25' Insualted Flex Pipe for Forced Air Kit - AC01350
- Will last for years of regular use, providing warmth and comfort in your home.
60" Tavern Brown Non-Combustible Mantel - AC02782
- Comes in tavern brown coloring and a supercast material meets non-combustibility standards
60" Washed Cedar Non-Combustible Mantel - AC02780
- Comes in washed cedar coloring and a supercast material meets non-combustibility standards
72" Tavern Brown Non-Combustible Mantel - AC02783
- Comes in tavern brown coloring and a supercast material meets non-combustibility standards
72" Washed Cedar Non-Combustible Mantel - AC02781
- Comes in washed cedar coloring and a supercast material meets non-combustibility standards
Forced Air Kit - VA4460
- Helps with fireplace combustion which includes cage type circulating fan, rheostat, and hardware
Glass Hearth Pad 10 MM - 18" X 50" - AC02760
- Particularly resistant to shocks
Warm Air Circulation Grille - Modern - AC01378
- Passive heat reclamation system requires no electricity which allows heat to escape the fireplace enclosure
We are an authorized dealers for every brand we sell!
Our SATISFACTION GUARANTEE and LOWEST PRICE GUARANTEE let you rest easy knowing you'll be taken care of, no matter what happens.
By buying from us you qualify for the full manufacturer warranty, save time and money! We ship directly to your door from the manufacturer's warehouse. Every product is checked for quality assurance and packaged with the utmost care to ensure it arrives in perfect working condition. We ship with only the best carriers including UPS, FedEx, USPS, and trusted freight companies to get your product to you in the fastest time possible. We even offer discounts with most orders just to make your day a little better.
We use encrypted SSL security to ensure your credit card information is 100% protected.
