Empire Direct-Vent Wall Furnace MV 10000 BTU DV210SGX Review

Do you need a high-quality yet reasonably-priced heater? You should be getting this Empire Direct-Vent Wall Furnace MV DV210SGX. Grab yours now here at Flame Authority, your Trusted Dealer!

Optional automatic blowers install easily for more even heat distribution. Ideal for bedrooms or studies, wall furnaces add comfort and beauty to any decor. Ideal for bedrooms or studies, wall furnaces add comfort and beauty to any decor. When you need to heat a single room or an entire home, Empire has Direct Vent Furnaces to suit your needs. Empire Direct-Vent Wall Furnaces are specifically designed for areas where flues or chimneys are not available or cannot be used. Empire Direct-Vent heaters have removable front panels for easy cleaning and servicing. With a Direct-Vent system, there is a positive difference in fuel economy because the outside air is used to support combustion. The air on the inside is warmed as it recirculates around a sealed chamber. This warm air heats the room cleanly and efficiently.

Note: 

• Children and adults should be alerted to the hazard of high surface temperature
• and should be kept away to avoid burns or clothing ignition.
• Installation and repair should be done by a qualified service person.
•  Due to high temperatures, the appliance should be located out of traffic and away from furniture and draperies.

Buy Empire Direct-Vent Wall Furnace MV 10000 BTU DV210SGX today. Available here at Flame Authority, your Trusted Dealer!

Features

Features:

• DV210SGX (10,000 Btu) and DV215SGX (15,000 Btu)
• Thermostat not included
• Slim, compact cabinet mounts on an outside wall.
• Quiet operation
• Matchless piezo ignition (heats without electricity)
• Optional automatic blower
• Ideal for bedrooms or studies
• Made in the USA

Manuals

Manuals:

• Product Brochure for Empire Direct-Vent Wall Furnace MV DV210SGX
• Owner's Manual & Installation Installation for Empire Direct-Vent Wall Furnace MV DV210SGX

Need assistance? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com to get the best-suited Wall Furnaces for your needs.

Specifications

Specifications:

• Color Cabinet and Front Panels: Beige
• Btu Output: 10,000
• Width: 16 1/4”
• Depth: 9 3/8”
• Height: 21 3/8”
• Shipping Weight, lb.. (Two Cartons): 42
• Control Options Works with:
• Manual Toggle Switch
• Thermostat Wall Switch
• Remote Control
• Minimum Clearances to Combustibles From Top: 12”
• Minimum Clearances to Combustibles From Top Each Side: 1”
• Bottom of Unit to Floor Covering: 0”
• Type of Gas (State on Order): Natural Gas/Propane
• Iron Pipe Size (N.P.T.): 1/2”
• Wall to Valve Inlet: 6 3/16”
• Right Side to Valve Inlet: 6 7/8”
• Center of Vent to Valve Inlet: N/A
• Valve Inlet to Floor Covering: 2 11/16”
• Wall Depth Minimum: 4 1/2”
• Wall Depth Maximum: See accessories for thicker walls of 13”
• Vent Opening: in Wall 6 1/2” Dia.
• Center of Vent to Nearest Outside Corner of Building or Obstruction: 16”
• Center of Vent from any Opening through which Flue Gases Could Enter a Building: 6”
• Bottom of Vent Above Grade: 12”
• Edge of Vent to Nearest Projecting Surface: 6”
• Vent Projection from Outside Wall: 4”
• Center of Flue to Floor Covering: 15 7/8”
• Safety Controls: Pilot and Main Burners include Automatic Shut-off.
• Warranty: 10-year limited warranty on the combustion chamber. All other parts carry a one-year limited warranty.

Options and Accessories

Options and Accessories:

TRW Wireless Remote Wall Thermostat

• This convenient wall thermostat puts you in control, allowing you to adjust your gas log settings from an easily accessible wall switch. Empire Comfort Systems makes your life simple with the added luxury of fireplace accessories that improve the quality of your gas log experience.

TDV1 Temperature Wall T-Stat-Digital, High-Efficient Wall Furnace

Features:

• Type: Digital Wire Wall Thermostat
• Weight: 1.00 lbs

TMV Wall Thermostat-Reed Switch

Features:

• Type: Wall Thermostat - Reed Switch
• Weight: 1.00 lbs

DVB1 Automatic Blower

• When you add an automatic blower to your direct vent furnace you are increasing the efficiency of your heater. A blower helps to circulate the warm, heated air to all corners of your space. This optional blower adds approximated 60 CFMs to quietly circulate the warm air further out from your heater, adding warmth throughout the room. It is for use with the Empire DV-210-SG and DV-215-SG Direct Vent Wall Furnaces.

Features:

• Type: Blower
• Weight: 5 lbs
• Automatically circulates heated air
• For use with Empire DV210SG and DV215SG gas furnaces

VSK1 Vinyl Siding Kit

• This vinyl siding vent kit installs on virtually any type of home providing a smart clean look to finish off your exterior vent. Its new slim-line look offers a less intrusive view of the outside of your home.
• Includes Siding Kit Only. includes outside wall plate with vent shield. Does not include a vent tube, cap, or wall plate.

Features:

• Type: Vent Kit
• Weight: 2.50 lbs
• Slim Vent Kit
• For Vinyl Siding Horizontal
• Model VSK1: for use with DV210SG and DV215SG By Empire Comfort System

DV822 Vinyl Siding

• This vent kit installs on a vinyl-sided home. It provides a clean look to finish off your exterior vent. This item is only the Vinyl Siding Vent Kit. It does not include a vent cap.
• The Vinyl Siding Vent Kit is for use with Empire Direct-Vent Wall Furnaces.

Features:

• Type: Siding Vent Kit
• Weight: 5.00 lbs
• Material: Vinyl
• For use with Empire Round Vent Kit DVVK4RE

DVVK4RE Horizontal Vent Kit with Termination Cap

• A termination kit is required to finish off your direct vent fireplace. This termination kit can be used with either a top or rear vent installation with a horizontal exit.

Features:

• Horizontal fireplace direct vent kit
• For walls up to 13 3/4" thick
• Includes:
• one small round horizontal termination cap
• one outside mounting plate
• one 4" diameter flue tube
• one 6 5/8" inlet air tube
• one wall thimble
• one thimble extension

TH345 Gas Furnace Flue Outlet Vent Tube Extension Kit

• You can trust and enjoy the service of your gas furnace more when it is properly vented. Empire's flue outlet vent tube makes this possible even with walls between 13-19 inches in thickness. It becomes an essential venting if you have super thick walls or other space challenges or restrictions. This extension tube is specifically made for the Empire DV210SG and the DV215SG gas furnace installations. Safe and economical venting is a win-win for the conscientious homeowner.

Features:

• Type: Extension Tube
• Weight: 2.00 lbs
• Extends the flue outlet vent tube to fit walls from 13" to 19"
• For use in Empire DV210SG and DV215SG gas furnace installations

TH346 Gas Furnace Air Inlet Vent Tube Extension Kit

• Your Empire direct vent wall furnace can be installed on an exterior wall. It uses outside air and vents directly through the wall. If you have walls that are between 13 and 19 inches thick, you may need this extension if you are installing an air inlet for your gas furnace because the supplied part may not be long enough. The part is designed for use with the DV210SG and DV215SG gas furnaces by Empire.

Features:

• Type: Extension Tube
• Weight: 2.00 lbs
• Extends the air inlet vent tube to fit walls from 13" to 19"
• For use in Empire DV210SG and DV215SG gas furnace installations

Conversion Kits Models:

Note: A separately purchased Flue Outlet Extension Kit is required to complete installation.

• Empire 17080 Nat to LP Conversion Kit.
• Empire 17081 LP to Nat Conversion Kit.

• Type: Conversion Kit
• Model 17080: Converts Natural Gas Unit into Liquid Propane
• Model 17081: Converts Liquid Propane Unit into Natural Gas
• For use with DV210 (-7 -10)