Osburn 1700 Wood Stove OB01700 REVIEW
During the cold season, do you want a wood stove that's very efficient and get you excited with its beautiful flames? Osburn 1700 Wood Stove OB01700 is available for you!
Designed to meet the needs of smaller spaces, the Osburn 1700 combines robustness and elegance to allow you to enjoy your heating experience with confidence. This unit is equipped with high-density bricks, a cast iron door, a built-in ash pan, a top heat deflector that redirects heat to the front of the unit, and side panels to reduce its clearances.
Choose your favorite version by customizing the unit to suit your style: refined door overlays, new leg designs, glass ash lip; significant innovations for the most seasoned experts. Exceeding air quality regulations with emissions as low as 1.26 g/h, the Osburn 1700's efficiency will save you time and money.
NOTE: Shown with required door overlay and pedestal or leg kit (not included).
Required Accessories:
- Black or brushed nickel door overlay
- Choice of pedestal, black or brushed nickel cast iron legs with ash pan kit
Also available in other models:
Avail your Osburn 1700 Wood Stove OB01700 Today and enjoy that feeling of comfort and warmth in your place for the next years to come!
Features
Features:
-
Fuel type: Dry cordwood (16" recommended)
-
Recommended heating area-ft²: 500 - 1,800
-
Overall firebox volume-ft³: 1.9
-
EPA loading volume-ft³: 1.44
-
Maximum burn time: 6 h
-
Maximum heat output-dry cordwood: 65,000 BTU/h (19 kW)
-
Overall heat output rate : 15,650 BTU/h (4.6 kW) to 23,300 BTU/h (6.83 kW)
-
Average overall efficiency (dry cordwood) : 70 % (HHV) 75 % (LHV)
-
Optimum overall efficiency:78 %
-
Optimum heat transfer efficiency: 74 %
-
Average particulate emissions rate: 1.26 g/h
-
Average CO: 58 g/h
Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time, and maximum heat output.
Recommended heating area and maximum burn time may vary subject to location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
As measured per CSA B415.1-10 stack loss method.
- Higher Heating Value of the fuel.
- Lower Heating Value of the fuel.
Performances are based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
Optimum overall efficiency at a specific burn rate (LHV).
The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
This appliance is officially tested and certified by an independent agency.
Carbon monoxide.
Manuals
Manuals:
Is this a right-sized unit for your Wood Stove? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com to ensure that this Wood Stove is best suited for your needs.
Specifications
Specifications:
-
Combustion technology: Non-catalytic
-
High-efficiency certified appliance: Yes, EPA 2020 approved
-
Maximum log length: 18"
-
Log positioning: Loading over the width
-
Chimney diameter: 6"
-
Flue outlet diameter: 6"
-
Type of chimney: CAN/ULC S629, UL 103 HT (2100 °F)
-
Minimum chimney height (feet): 15'
-
Baffle type: C-Cast or equivalent
-
Approved for an alcove installation: Yes
-
Approved for a mobile home installation: Yes, with fresh air intake
-
Shipping Weight: 331 lb (150 kg)
-
Door type: Single, glass with cast iron frame
-
Glass type: Ceramic glass
-
Glass surface – dimensions (Width X Height): 15 3/4" x 9 3/8"
-
Glass air-wash system: Yes
-
Overall dimension: (Height) 30 3/8" (Width): 24 7/8" (Depth): 23 1/4"
-
Door opening – dimension: (Height) 8 3/4" (Width): 17 1/4"
-
Firebox – dimension: (Height) 11 7/8" (Width) 19 5/8" (Depth) 13 1/2"
-
Firebox lined with refractory bricks for better heat distribution: Yes
-
Stainless-steel secondary-air system improving gas combustion: Yes
-
Model: Legs or pedestal
-
Steel thickness – body: 3/16"
-
Steel thickness – top: 5/16"
-
USA standard (emissions): EPA
-
Canadian Standard (emissions): CSA B415.1-10
-
USA standard (safety): UL 1482, UL 737
-
Canadian standard (safety): ULC S627
-
Tested and listed as per applicable standards: By an accredited laboratory (CAN/USA)
-
Warranty: Limited lifetime
Minimum Clearances to Combustibles
Minimum Clearances to Combustibles
(Data expressed in inches. 1 inch = 25.4 mm)
Canada
- Clearance - back wall
- Single wall Pipe - 14 1/2"
- Double Wall pipe - 6"
- Clearance - corner
- Single wall Pipe - 12"
- Double Wall Pipe - 6"
- Clearance - side wall
- Single wall Pipe - 10"
- Double Wall Pipe - 10"
- Clearance - top ( measured from the platform on which the appliance is installed)
- Single wall Pipe - 84"
- Double Wall Pipe - 84"
- Clearance - minimum floor protection in front of the appliance
United States
- Clearance - back wall
- Single wall Pipe - 13"
- Double Wall pipe - 6"
- Clearance - corner
- Single wall Pipe - 12"
- Double Wall Pipe - 6"
- Clearance - side wall
- Single wall Pipe - 10"
- Double Wall Pipe - 10"
- Clearance - top ( measured from the platform on which the appliance is installed)
- Single wall Pipe - 84"
- Double Wall Pipe - 84"
- Clearance - minimum floor protection in front of the appliance
The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogs, flyers, magazines, and/or websites).
Note: Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
Options and Accessories
Options and Accessories:
130 cfm Blower with Variable Speed Control (Thermodisc Included) - AC01000
- Provide Mechanical Convection of heat to the room
5" Fresh Air Intake Kit for Wood Stove on Legs - AC01291
- Enable outside combustion air to feed into your appliance making the fireplace more efficient
Osburn Rigid Firescreen - AC01299
- Enhances the crackle of your fire
Osburn 5" Fresh Air Intake Kit for Wood Stove on Pedestal - AC01336
- Allows outside combustion air to be supplied to the stove
5" X 4' Insulated Flex Pipe for Fresh Air Intake Kit - AC02090
-
Consists of a 4 ft. length of 5 in. diameter flexible insulated pipe, fits on fresh air kit adaptor
Osburn Glass Ash Lip - OA10132
- Keeps the stove's surrounding area clean
We are an authorized dealers for every brand we sell!
Our SATISFACTION GUARANTEE and LOWEST PRICE GUARANTEE let you rest easy knowing you'll be taken care of, no matter what happens.
By buying from us you qualify for the full manufacturer warranty, save time and money! We ship directly to your door from the manufacturer's warehouse. Every product is checked for quality assurance and packaged with the utmost care to ensure it arrives in perfect working condition. We ship with only the best carriers including UPS, FedEx, USPS, and trusted freight companies to get your product to you in the fastest time possible. We even offer discounts with most orders just to make your day a little better.
We use encrypted SSL security to ensure your credit card information is 100% protected.
