Empire Direct-Vent Counterflow Wall Furnace 24V System DVC35SPPX

Features:

• DVC35SPP/ DVC35IP (35,000 Btu) recesses between standard Wall Studs
• Thermostat not included
• Choose Standing Pilot or Electronic Intermittent Pilot (saves even more energy)
• Front Panels Remove for Cleaning and Servicing
• Counterflow Blower Circulates Warm Air at Floor Level
• Multi-Room Heating Capacity with Optional Outlet Kits
• Up to 76% A.F.U.E. efficient
• Made in the USA

Manuals:

• Product Brochure for Empire Direct-Vent Counterflow Wall Furnace 24V System DVC35SPPX
• Owner's Manual and Installation Instructions for Empire Direct-Vent Counterflow Wall Furnace 24V System DVC35SPPX

Need assistance? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com to get the best-suited Wall Furnaces for your needs

• 
  
• DVC35 and DVC55 models are design certified in accordance with American National Standards Institute
• Z21.86 (latest standard) and CSA2.32 (latest standard) by the Canadian Standard Association, as Fan Type
• Direct Vent Wall Furnaces.
• FAW40 and FAW55 models are design certified in accordance with American National Standards Institute
• Z21.86 (latest standard) and CSA2.32 (latest standard) by the Canadian Standard Association, as Fan Type
• Vented Wall Furnaces.

Specifications:

• Color Cabinet and Front Panels: Beige
• Btu Input: 35,000
• Blower Output, Cu. Ft./Min: 275
• Width: 14 1/8”
• Depth: 10 3/8”
• Height: 72 1/2”
• Shipping Weight, lb:115
• Works with:
• Manual Toggle Switch
• Thermostat Wall Switch
• Remote Control
• Minimum Clearances to Combustibles From Top (To Ceiling): 4”
• Each Side (To Nearest Adjacent Sidewall): 4” and 18” with (SOR1)
• Bottom of Unit to Wood Floor: Zero
• Depth Unit May Be Recessed: 9 1/2”
• Type of Gas (State on Order): Natural Gas/Propane
• Iron Pipe Size (N.P.T.): 1/2”
• Wall to Valve Inlet: 7 3/4”
• Floor Covering to Valve Inlet: 4”
• Wall Depth Minimum: 3/4”
• Wall Depth Maximum: 10”
• Vent Opening Inside Wall Surface: 7 1/2” Diameter
• Vent Opening Outside Wall Surface: 7 1/2” Diameter
• Center of Vent to Nearest Outside Corner of Building or Obstruction: 12"
• Edge of Vent to Nearest Projecting Surface: 6”
• Vent Projection from Outside Wall: 6”
• Center of Flue to Floor Covering: 59 1/4”
• Safety Controls: Pilot and Main Burners Include Automatic Shut-off

Options and Accessories:

TRW Wireless Remote Wall Thermostat

• This convenient wall thermostat puts you in control, allowing you to adjust your gas log settings from an easily accessible wall switch. Empire Comfort Systems makes your life simple with the added luxury of fireplace accessories that improve the quality of your gas log experience.

TDV1 Temperature Wall T-Stat-Digital, High-Efficient Wall Furnace Control

• Wall Thermostat, Digital, Wire

Features:

• Type: Digital Wire Wall Thermostat
• Weight: 1.00 lbs

Note:  For use with your Empire High-Efficiency PVS18 and PVS35 UltraSaver90 Plus Heating Systems.

24-Volt Wall Thermostat

• Thermostats make a heating appliance more efficient, more precise, and easier to control. That's the concept behind this Empire 24-Volt Wall Thermostat, too. It takes your Empire High-Efficiency Direct Vent Wall Furnace and makes it a more accurate and effective heating tool in your home. Get everything you want out of your favorite appliance by adding this simple thermostat to the mix.

VSK2 Vinyl Siding Kit

• This vinyl siding vent kit installs on virtually any type of home providing a smart clean look to finish off your exterior vent. Its new slim-line look offers a less intrusive view of the outside of your home.
• Includes Siding Kit Only. includes outside wall plate with vent shield. Does not include a vent tube, cap, or wall plate.

DV822 Vinyl Siding Vent-Kit

• This vent kit installs on a vinyl-sided home. It provides a clean look to finish off your exterior vent. This item is only the Vinyl Siding Vent Kit. It does not include a vent cap.
• The Vinyl Siding Vent Kit is for use with Empire Direct-Vent Wall Furnaces.

SOK1 10" Side Outlet Kit

• For both direct vent and conventional vent counterflow wall furnaces, this side outlet kit allows heat to disperse from the side of the furnace cabinet. It does require the side outlet register (SOR-1 sold separately) to redirect the heat flow.

SOR1 Side Outlet Register

• Empire Direct Vent Counterflow Furnace Side Outlet Register

Features:

• Type: Register
• Side Outlet Register
• Fits: DVC-35SPP, DVC-35IP, DV-55SPP and DV-55IP

Conversion Kits

• Model DV1344: For use with DVC35SPPX Converts Natural Gas Unit into Liquid Propane
• Model DV1346: For use with DVC35SPPX Converts Liquid Propane Unit into Natural Gas