Empire High-Efficient Direct-Vent Wall Furnace 20000 BTU DV20E

Features:

• State-of-the-Art Technology Ensures Exceptional
• Fuel Efficiency
• Electronic Thermistor Thermostat Maintains
• Temperature Range
• Standard Wall Thermostat Hook-up Accepts Any
• 24-Volt Wall Thermostat – Including Efficient
• Programmable Thermostats (purchased separately)
• Total Comfort for a Fraction of the Cost of Electric Heat
• Sealed Combustion Chamber Maintains Indoor Air Quality
• Discreet Vent Termination minimizes disruptions
  to home’s exterior
• Filtered Air System
• Standard Unit Vents Through a Wall up to 10 inches deep and up to 32 inches with the
• DVT-2 accessory kit
• Extended Horizontal and Vertical Vent Run
• Accessories for 20,000 and 40,000 Btu Wall
• Furnaces allow up to 15 feet of venting
• Built-in Blower Enhances Heat Distribution for Added Comfort
• Hot Surface Ignition Ensures Quiet Starts and
• Saves Gas – Up To $20 Per Month
• Three Btu Sizes to Heat Any Space
• Peace of Mind Safety Features Built into Furnace
• Mobile Home Certified

Manuals:

• Product Brochure for Empire High-Efficient Direct-Vent Wall Furnace 20000 BTU DV20E
• User's Manual and Installation Instructions for Empire High-Efficient Direct-Vent Wall Furnace 20000 BTU DV20E

Need assistance? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com to get the best-suited Wall Furnaces for your needs

Specifications:

• Color Cabinet and Front Panels: Beige
• Btu Input: 20,000
• Btu Output: 16,300
• Width: 37”
• Depth: 15 3/4”
• Height: 26”
• Shipping Weight, lb.. (Two Cartons): 128
• Electronic Control: Yes
  
• Blower, tangential type, one speed: 350 cfm
• Minimum Clearances to Combustibles From Top: 10”
• Minimum Clearances to Combustibles From Left Side: 3”
• Right Side* *Note: 10”
• Right Side Clearance Suggested for Serviceability to Right Side Panel Area: 3”
• Bottom of Unit to Floor Covering: 0”
• Type of Gas (State on Order): Natural Gas/Propane
• Iron Pipe Size (N.P.T.): 1/2”
• Wall Depth Minimum: 4 1/2”
• Wall Depth Maximum: See accessories for thicker walls of 13”
• Vent Opening in Wall: 3 1/2” Dia.
• 15’ with 2 Elbows: Yes
• 10’ with 3 Elbows: Yes
• Safety Controls: Automatic Shut-off for Main Burner
  
• Over Temperature: Safety Limit Switch

Options & Accessories

TRW Wireless Remote Wall Thermostat

• This convenient wall thermostat puts you in control, allowing you to adjust your gas log settings from an easily accessible wall switch. Empire Comfort Systems makes your life simple with the added luxury of fireplace accessories that improve the quality of your gas log experience.

TDV1 Temperature Wall Thermostat-Digital

• Wall Thermostat, Digital, Wire

Features:

• Type: Digital Wire Wall Thermostat
• Weight: 1.00 lbs
• For use with your Empire High-Efficiency PVS18 and PVS35 UltraSaver90 Plus Heating Systems.

DVT2 Extended Vent Termination

• The Empire DVT-2 intake/exhaust extension kit replaces the standard vent assembly (which only runs 10"). It is for wall thicknesses of up to 32".

Features:

• Type: Extended Vent Termination
• Weight: 11 lbs
• Fits: DV-20E, DV-40E, DV-55E Direct Vent Wall Furnaces
• Direct-Vent Wall Furnaces Accessory

14" DVP1 Floor Pad

• A floor pad for your heater or furnace serves several different purposes. It will provide a safety layer of insulation between your heating appliance and the floor, it will protect your floor from the weight of the appliance, and it will give things an overall more complete look.

Features:

• Type: Floor Pad
• Dimensions: 36" W x 14" D x 1/2" H
• Weight: 10 lbs
• Fits: DV-20E, DV-40E, DV-55E Direct Vent Wall Furnaces

Intake/Exhaust Extension Kit 54" Kit without Elbows for Extended vent runs

• Empire Heating Systems DVE2 Intake/Exhaust Extension Kit (54" kit for extended vent runs)
• Extending the vent run in you Empire direct vent wall furnace takes the right parts. This kit features a 54-inch intake and exhaust system as well as two elbows for easy installation. Safety first is the general rule for all heating systems, so taking shortcuts is definitely not the answer. If you need a longer ventilation system to maximize efficiency, be sure to get exactly what is needed. This extension kit is definitely affordable and well worth the peace of mind you will have knowing your system is installed correctly.

Intake/Exhaust Extension Kit 54" Kit w/ 2 Elbows For Extended Vent Runs

• Empire Heating Systems DVE1 Intake/Exhaust Extension Kit (54-inch w/ 2 elbows)
• Planning an extended vent run for your Empire Direct Vent Wall Furnace? This Empire Wall Furnace Intake/Exhaust Extension Kit will help you vent your furnace safely and conveniently.
• Extending the vent run in you Empire direct vent wall furnace takes the right parts. This kit features a 54-inch intake and exhaust system as well as two elbows for easy installation. Safety first is the general rule for all heating systems, so taking shortcuts is definitely not the answer. If you need a longer ventilation system to maximize efficiency, be sure to get exactly what is needed. This extension kit is definitely affordable and well worth the peace of mind you will have knowing your system is installed correctly.

T24V 24-Volt Wall Thermostat

• Thermostats make a heating appliance more efficient, more precise, and easier to control. That's the concept behind this Empire 24-Volt Wall Thermostat, too. It takes your Empire High-Efficiency Direct Vent Wall Furnace and makes it a more accurate and effective heating tool in your home. Get everything you want out of your favorite appliance by adding this simple thermostat to the mix.