Real Fyre G10 Vent-Free Gas Burner System
Real Fyre G10 24"/30" Vent-Free Gas Burner with Electronic Remote – G10-24/30-01V / G10-24/30-01VP
The Real Fyre G10 24"/30" Vent-Free Gas Burner is designed for compatible 24-inch or 30-inch Real Fyre G10 ceramic refractory log sets. The -01V control configuration combines electronic ignition, an on-demand pilot, and variable flame-height remote control, with a manufacturer-rated input range of 19,000 to 37,000 BTU.
Series
G10
Burner Size
24"/30"
BTU Range
19,000–37,000 BTU
Control
Variable Flame Remote
Ignition
Electronic
Pilot
On-Demand Pilot
Fuel Options
Natural Gas or Propane
Log Set
Required – Sold Separately
Electronic Vent-Free Burner Control with Separate Log-Set Selection
The G10-24/30-01V platform is designed for buyers who want a traditional gas-log fireplace appearance with electronic controls while retaining flexibility in the final decorative log style.
Because the burner and decorative logs are sold separately, the G10-24/30 can be paired with a compatible 24-inch or 30-inch G10 log set after the fireplace dimensions have been verified.
The burner is available in separate factory-configured Natural Gas and Propane versions. Field conversion between those fuels is not permitted by the manufacturer.
Real Fyre G10-24/30 at a Glance
Product Type
Vent-Free Gas Burner System
Compatible Log Sizes
24" or 30"
BTU Range
19,000–37,000 BTU
Control Type
Variable Flame-Height Remote
Ignition
Electronic Ignition
Included Media
Lava Granules, Glowing Embers & Bryte Coals
Compatible Log Series
Real Fyre G10
Is the Real Fyre G10-24/30-01V Right for Your Fireplace?
Best For
- Approved fireplaces sized for a 24" or 30" G10 log set.
- Buyers who want electronic ignition instead of a standing pilot.
- Users who want variable flame-height adjustment by remote.
- Installations where a compatible G10 log style will be purchased separately.
- Natural Gas installations using model G10-24/30-01V.
- Propane installations using model G10-24/30-01VP.
- Approved vent-free installations with sufficient combustion and ventilation air.
- Approved vented decorative installations where vent-free operation is not permitted.
Consider Another System If
- You expect decorative logs to be included with the burner.
- Your fireplace does not meet Real Fyre's minimum dimensions.
- Your fireplace manufacturer prohibits unvented burner systems.
- You need to field-convert between Natural Gas and Propane.
- You want unattended or overnight heating.
- Your installation cannot provide the required combustion and ventilation air.
- You need a burner for a log set outside the compatible G10 series.
Electronic Ignition, On-Demand Pilot & Variable Flame Remote
Electronic Ignition
The -01V control configuration uses electronic ignition rather than the standing-pilot arrangement associated with other G10 control options.
On-Demand Pilot
The pilot operates on demand as part of the electronic ignition control system.
Variable Flame Height
The remote allows the burner flame to be raised or lowered without manually adjusting the valve at the fireplace.
19,000–37,000 BTU
The burner output varies with the selected flame setting across its manufacturer-rated input range.
G10-24/30-01V vs. G10-24/30-01VP
The two model numbers identify separate factory fuel configurations.
| Model |
Fuel Type |
Field Conversion |
| G10-24/30-01V |
Natural Gas |
Not Permitted |
| G10-24/30-01VP |
Propane |
Not Permitted |
Fuel-selection warning: The manufacturer states that the appliance is equipped for either Natural Gas or Propane and that field conversion is not permitted. Order the version that matches the fuel supply at the installation location.
Choosing Between a 24" and 30" G10 Log Set
The G10-24/30 burner supports compatible 24-inch and 30-inch Real Fyre G10 log sets, but the required fireplace opening changes with the selected log size.
| Configuration |
Minimum Front Width |
Minimum Rear Width |
Minimum Depth |
Minimum Height |
| G10-24/30 with 24" Log Set |
28" |
20" |
14" |
17" |
| G10-24/30 with 30" Log Set |
34" |
20" |
14" |
17" |
Measure before ordering: Do not choose the log size from the fireplace's nominal width alone. Verify the front width, rear width, depth, and height against the manufacturer's minimum fireplace dimensions.
Compatible Real Fyre G10 Log Styles
Real Fyre offers the G10 platform with five ceramic refractory log styles. The compatible log set is purchased separately.
Charred Frontier Oak
Available in compatible G10 sizing.
Charred Aged Split Oak
Available in compatible G10 sizing.
Charred Alpine Birch
Available in compatible G10 sizing.
Charred Gnarled Split
Available in compatible G10 sizing.
Gnarled Oak
Available in compatible G10 sizing.
View Compatible Real Fyre G10 24"/30" Log Sets
What's Included with the G10-24/30-01V Burner?
G10 Burner System
24"/30" G10 burner assembly.
ODS Pilot Assembly
Oxygen Depletion Sensor safety pilot.
Electronic Control Valve
Part of the -01V electronic-control configuration.
Control Module & Receiver
Electronic control components for system operation.
Remote Transmitter
Provides variable flame-height control.
Flex Connector
3/8" O.D. × 30" flex connector with adapter.
Damper Clamp
Included with the burner system.
Decorative Media
Glowing embers, Bryte Coals, lava granules, and decorative wood chip.
Not included: The decorative Real Fyre G10 log set is packaged and sold separately.
Oxygen Depletion Sensor Safety Pilot
The G10 burner system is equipped with an Oxygen Depletion Sensor (ODS) safety pilot.
According to the manufacturer documentation, the ODS monitors available oxygen in the room and shuts the burner system off before oxygen levels fall below the specified operating threshold.
Vent-free use: Proper combustion and ventilation air must be provided whenever the G10 is operated as an unvented room heater.
Approved Fireplace & Installation Requirements
The G10 is designed for installation in an approved solid-fuel-burning masonry fireplace, qualifying UL-127 factory-built fireplace, or listed ventless firebox enclosure as described in the manufacturer instructions.
Masonry Fireplace
Installation is permitted in qualifying approved solid-fuel-burning masonry fireplaces when manufacturer requirements are satisfied.
UL-127 Factory-Built Fireplace
A qualifying factory-built fireplace may be used when its listing and instructions permit the installation.
Listed Ventless Firebox
The G10 may be installed in an appropriate listed ventless firebox enclosure where permitted.
Installation restriction: Do not install the G10 in a factory-built fireplace whose instructions state that it has not been tested or should not be used with unvented burner systems.
Vent-Free or Vented Decorative Operation
Vent-Free Operation
Where permitted, the G10 can operate as an ANSI Z21.11.2 unvented room heater when all fireplace, combustion-air, clearance, and local-code requirements are satisfied.
Vented Decorative Operation
Where vent-free heaters are not permitted, the manufacturer documentation states that the G10 may be installed and operated as a vented decorative appliance when all applicable vented-installation requirements are followed.
Local-code check: State and local requirements must be checked before installation because vent-free appliance rules vary by jurisdiction.
Combustion & Ventilation Air Requirements
The G10 must not be installed as a vent-free heater in a confined space unless adequate combustion and ventilation air is provided.
The manufacturer's instructions define an unconfined space as having at least 50 cubic feet of room volume per 1,000 BTU/hr of the aggregate input rating of gas appliances installed in the space.
At maximum input: The G10-24/30 can operate at up to 37,000 BTU. Room volume and the input rating of other gas appliances in the same space must therefore be considered when determining whether adequate combustion and ventilation air is available.
Minimum Clearance Considerations
When manufacturer-specific fireplace clearances are not otherwise provided, the G10 instructions include the following minimum clearance guidance.
| Sidewalls |
6" minimum from each side of the fireplace opening |
| Ceiling |
42" minimum above the top of the fireplace opening |
| Flooring |
Follow hearth and noncombustible-flooring requirements in the installation manual |
| Mantel |
Varies by projection height and whether a fireplace hood is installed |
Clearance warning: Mantel, flooring, hood, and noncombustible-material requirements vary by installation. Use the full Real Fyre G10 manual rather than relying only on these summary values.
Fireplace Floor Requirements
The fireplace floor must be level, clean, and smooth.
The burner must not be installed in a fireplace with an excessive recessed hearth. The manufacturer's instructions state that an ash lip or recess exceeding 3/4" is not permitted.
Gas Supply Requirements
The available gas supply must match the fuel type shown on the burner-system rating plate.
| Gas Type |
Minimum Inlet Pressure |
Maximum Inlet Pressure |
Outlet Pressure on High |
| Natural Gas |
5" w.c. |
10.5" w.c. |
3.5" w.c. |
| Propane |
11" w.c. |
13" w.c. |
10" w.c. |
The manufacturer specifies a minimum 1/2" interior-diameter gas supply pipe. Longer gas-line runs may require a larger diameter.
Fuel verification: Do not install the burner if the available fuel does not match the model's factory fuel configuration.
Glass Doors & Fireplace Screen Requirements
If fireplace glass doors are present, the manufacturer requires them to be fully open whenever the vent-free burner is operating.
A fireplace screen must also be in place during operation unless another approved provision for combustion air is provided.
Attended Supplemental Heating Appliance
Real Fyre identifies the G10 as an attended appliance intended for supplemental heating.
Do not leave unattended: Adults must be present while the G10 is operating. Do not leave the burner running unattended or while anyone is sleeping.
When operated vent-free, adequate combustion and ventilation air must be maintained. The manufacturer documentation also notes that extended vent-free operation can add moisture to the home.
Maintenance Requirements
Annual Professional Service
The manufacturer calls for inspection and cleaning by a qualified professional service technician at least annually.
Burner Ports
Burner ports must remain clean and unobstructed.
ODS Pilot
The oxygen-depletion safety pilot must be maintained in clean operating condition.
Flash Tube & Air Passages
Related air openings and passages must remain free of lint, pet hair, dust, and debris.
More frequent cleaning may be required where environmental conditions cause additional buildup.
Real Fyre G10 Warranty Highlights
| Component |
Limited Warranty |
| Real Fyre Vent-Free Burner |
10 Years |
| Valves, Pilots & Controls |
1 Year, excluding batteries |
| Real Fyre Vent-Free Ceramic Refractory Gas Logs |
Lifetime for as long as the owner owns them |
Warranty distinction: Burner, control, and separately purchased ceramic refractory log components have different warranty periods. Review the applicable manufacturer warranty terms for complete conditions and exclusions.
Complete Real Fyre G10-24/30-01V Technical Specifications
| Brand |
Real Fyre |
| Series |
G10 |
| Product Type |
Vent-Free Gas Burner System |
| Burner Configuration |
24"/30" |
| Compatible Log Sizes |
24" or 30" |
| Compatible Log Series |
Real Fyre G10 |
| Natural Gas Model |
G10-24/30-01V |
| Propane Model |
G10-24/30-01VP |
| Fuel Conversion |
Field Conversion Not Permitted |
| BTU Range |
19,000–37,000 BTU |
| Control Type |
Variable Flame-Height Remote |
| Ignition |
Electronic Ignition |
| Pilot |
On-Demand Pilot |
| Safety Pilot |
Oxygen Depletion Sensor / ODS |
| Log Set Included |
No – Required and Sold Separately |
| Included Decorative Media |
Lava Granules, Glowing Embers & Bryte Coals |
| Included Control Components |
Electronic Control Valve, Control Module, Receiver & Remote Transmitter |
| Included Connector |
3/8" O.D. × 30" Flex Connector with Adapter |
| Minimum Gas Supply Pipe |
1/2" Interior Diameter |
| Certification |
ANSI Z21.11.2 Unvented Room Heater and ANSI Z21.60 Vented Decorative Appliance |
Flame Authority Expert Recommendation
Choose the Real Fyre G10-24/30-01V when you want a vent-free-capable gas-log burner with electronic ignition, an on-demand pilot, and remote flame-height adjustment while retaining the flexibility to select a compatible decorative G10 log style separately.
The most important buying decision is not simply whether you prefer a 24" or 30" log set. First verify the fireplace's front width, rear width, depth, height, approved installation type, available fuel, and local vent-free requirements.
Order G10-24/30-01V for Natural Gas or G10-24/30-01VP for Propane. Do not plan to convert the unit later because Real Fyre does not permit field conversion between fuel types.
Official Manufacturer Resources
Real Fyre Vent-Free Collection Catalog
G10 Series product configurations, log styles, sizing, fuel options, and general vent-free product information.
Real Fyre G10 Instructions Manual
Installation, minimum fireplace dimensions, clearances, combustion-air requirements, gas pressures, operation, ODS safety information, maintenance, and service guidance.
Real Fyre G10-24/30-01V FAQs
Does the Real Fyre G10-24/30-01V include the gas logs?
No. The G10-24/30-01V is the burner system. A compatible 24" or 30" Real Fyre G10 log set is required and sold separately.
What size log set fits the Real Fyre G10-24/30 burner?
The burner supports compatible 24" or 30" G10 log sets. Verify the fireplace dimensions before choosing the log size.
How many BTUs does the Real Fyre G10-24/30 produce?
The variable-control G10-24/30 configuration operates from 19,000 to 37,000 BTU.
Does the G10-24/30-01V have electronic ignition?
Yes. The -01V configuration includes electronic ignition, an on-demand pilot, and variable flame-height remote control.
What is the difference between G10-24/30-01V and G10-24/30-01VP?
G10-24/30-01V is factory configured for Natural Gas, while G10-24/30-01VP is factory configured for Propane. Field conversion between fuel types is not permitted.
What size fireplace is required for a 24" G10 log set?
A 24" G10 configuration requires a minimum fireplace opening of 28" front width × 20" rear width × 14" depth × 17" height.
What size fireplace is required for a 30" G10 log set?
A 30" G10 configuration requires a minimum fireplace opening of 34" front width × 20" rear width × 14" depth × 17" height.
Does the -01V model use a standing pilot?
No. The -01V configuration uses electronic ignition with an on-demand pilot. Standing-pilot operation belongs to a different G10 control option.
What comes with the Real Fyre G10-24/30-01V burner?
The burner system includes the burner assembly, ODS pilot, electronic control valve, control module and receiver, remote transmitter, flex connector, damper clamp, glowing embers, Bryte Coals, lava granules, and decorative wood chip. The G10 decorative log set is sold separately.
Can the Real Fyre G10 be used as a vented decorative appliance?
Yes. The G10 is certified as both an ANSI Z21.11.2 unvented room heater and ANSI Z21.60 vented decorative appliance. Vented installation must follow the manufacturer's applicable installation requirements.
Can this burner be installed in any fireplace?
No. Installation is limited to approved fireplace types described in the Real Fyre instructions. Do not install the burner in a factory-built fireplace whose instructions prohibit or do not permit unvented burner systems.
Does a vent-free G10 installation require ventilation?
Yes. Adequate combustion and ventilation air is required. The system must not be installed as an unvented heater in a confined space unless the required provisions are provided.
Can the Real Fyre G10 be left on while unattended or sleeping?
No. Real Fyre identifies the G10 as an attended supplemental-heating appliance. Adults must be present while it is operating, and it must not be left burning while anyone is sleeping.
How often should the Real Fyre G10 be serviced?
The manufacturer requires inspection and cleaning by a qualified professional service technician at least once per year, with more frequent cleaning where dust, lint, pet hair, or other conditions cause additional buildup.
Before You Order
Confirm Before Purchase
- Your fireplace is an installation type approved by Real Fyre.
- The fireplace dimensions meet the minimum size for the intended 24" or 30" log set.
- The selected model matches your actual fuel supply.
- You understand that Natural Gas and Propane versions are separate factory configurations.
- A compatible G10 decorative log set has been selected separately.
- The installation satisfies applicable vent-free or vented-use requirements.
- Adequate combustion and ventilation air can be provided.
- Required sidewall, ceiling, mantel, flooring, and hearth conditions can be met.
- The fireplace floor is level, clean, smooth, and does not exceed the permitted hearth recess.
- Qualified installation and annual service have been planned.
Do Not Assume
- That decorative G10 logs are included with the burner.
- That 24" and 30" log sets require the same fireplace opening.
- That Natural Gas and Propane models can be field converted.
- That every factory-built fireplace permits vent-free gas burners.
- That “vent-free” means no combustion-air or ventilation requirements.
- That the G10 is intended as an unattended primary heating appliance.
- That glass fireplace doors can remain closed during vent-free operation.
- That local codes permit vent-free operation in every location.
Final planning check: Use the Real Fyre G10 Instructions Manual for minimum fireplace dimensions, approved installation types, combustion-air requirements, clearances, gas pressures, operation, ODS safety, maintenance, and vented/vent-free installation guidance. Select the correct factory fuel model and purchase the compatible G10 24" or 30" log set separately.
