Real Fyre G10 Vent-Free Gas Burner System
Real Fyre G10-24/30-15 24"/30" Vent-Free Gas Burner with Variable Flame Remote
The Real Fyre G10-24/30-15 is a vent-free gas burner system designed for compatible 24-inch or 30-inch Real Fyre G10 ceramic refractory log sets. The -15 control configuration combines a standing pilot with remote variable flame-height adjustment, allowing the fire presentation and burner output to be raised or lowered from approximately 19,000 BTU on low to 37,000 BTU on high.
Series
G10
Model
G10-24/30-15
Compatible Log Sizes
24" or 30"
BTU Range
19,000–37,000 BTU
Control
Variable Flame Remote
Pilot
Standing Pilot
Fuel Options
Natural Gas or Propane
Log Set Included
No
Important: Compatible G10 Log Set Required – Sold Separately
The G10-24/30-15 is the burner system. A compatible Real Fyre G10 24-inch or 30-inch ceramic refractory log set is required to complete the fireplace installation and is sold separately.
Shop Real Fyre Log Sets for G10-24/30 Vent-Free Burner System
Remote Flame Adjustment with a Standing-Pilot G10 Burner
The G10-24/30-15 is designed for homeowners who want a traditional gas-log fireplace appearance combined with vent-free heating capability and adjustable flame control.
Unlike a fixed-output burner, the -15 configuration allows the burner flame to be raised or lowered remotely while using a standing pilot.
The platform supports separately purchased 24-inch and 30-inch G10 log sets, allowing the final decorative appearance to be selected independently from the burner controls.
Important distinction: The -15 model uses a standing pilot. It should not be confused with the G10 -01V configuration, which uses electronic ignition and an on-demand pilot.
Real Fyre G10-24/30-15 at a Glance
Manufacturer
Robert H. Peterson Co.
Product Type
Vent-Free Gas Burner System
Control Type
Variable Flame-Height Remote
Pilot Type
Standing Pilot
Safety System
Oxygen Depletion Sensor
Is the Real Fyre G10-24/30-15 Right for Your Fireplace?
Best For
- Compatible fireplaces sized for a 24" or 30" G10 log set.
- Buyers who want remote variable flame-height adjustment.
- Users who prefer a standing-pilot control system.
- Vent-free installations where permitted by applicable codes.
- Approved vented decorative installations where required.
- Natural Gas installations using the appropriate NG configuration.
- Propane installations using the appropriate LP configuration.
- Homeowners who want to select the decorative G10 log style separately.
Consider Another System If
- You want electronic ignition with an on-demand pilot.
- Your fireplace does not meet the minimum dimensions.
- Your fireplace manufacturer prohibits unvented burners.
- You need to field-convert between Natural Gas and Propane.
- You expect the ceramic logs to be included.
- Your installation cannot provide adequate combustion and ventilation air.
- You need a primary heating system rather than supplemental heat.
Variable Flame-Height Remote Control
The -15 control configuration is designed specifically for variable flame-height operation.
After the standing ODS pilot is established, the flame-height control system allows the main burner flame to be increased or decreased remotely.
Remote Flame Adjustment
Raise or lower the flame without manually adjusting the burner valve at the fireplace.
Standing Pilot
The -15 configuration uses a standing pilot rather than electronic ignition.
Variable Output
The burner operates from approximately 19,000 BTU at low flame to 37,000 BTU at high flame.
Heating Performance: 19,000–37,000 BTU
Low Setting
19,000 BTU
Available with the variable-flame -15 control configuration.
High Setting
37,000 BTU
Maximum manufacturer-listed input for the G10-24/30 burner.
The variable flame system allows the user to adjust both the appearance and output of the fire within the burner system's operating range.
Natural Gas or Propane – Select the Correct Fuel Version
The G10-24/30 is offered in dedicated Natural Gas and Propane configurations.
Field conversion is not permitted. The burner must be ordered for the fuel available at the installation location, and the supplied gas must match the fuel type identified on the burner rating plate.
If the available gas supply does not match the burner configuration, do not install or operate the appliance.
Compatible Real Fyre G10 Log Styles
The G10 platform supports multiple Real Fyre ceramic refractory log styles, sold separately.
Charred Frontier Oak
CHFR Series
Charred Aged Split Oak
CHAS Series
Charred Alpine Birch
CHAB Series
Charred Gnarled Split
CHGS Series
Browse Compatible Real Fyre G10 Log Sets
What's Included with the G10-24/30-15?
G10-24/30 Burner System
Burner platform for compatible 24" or 30" G10 log sets.
-15 Variable Flame Controls
Variable flame-height operating configuration.
Remote System
Remote operation for flame-height adjustment.
Lava Granules
Included decorative burner media.
Glowing Embers
Included to help create the glowing ember-bed presentation.
Bryte Coals
Included decorative media for the G10 burner presentation.
Not included: A compatible Real Fyre G10 ceramic refractory log set is required and sold separately.
Minimum Fireplace Dimensions
The fireplace must meet Real Fyre's minimum dimensional requirements for the selected G10 log size.
| Configuration |
Minimum Front Width |
Minimum Rear Width |
Minimum Depth |
Minimum Height |
| G10-24/30 with 24" Log Set |
28" |
20" |
14" |
17" |
| G10-24/30 with 30" Log Set |
34" |
20" |
14" |
17" |
Measure before ordering: Do not select the 24" or 30" log size based only on the fireplace's nominal width. Verify front width, rear width, depth, and height.
Will the G10-24/30 Fit My Fireplace?
24" Log Configuration
Requires at least 28" front width × 20" rear width × 14" depth × 17" height.
30" Log Configuration
Requires at least 34" front width × 20" rear width × 14" depth × 17" height.
The burner should be centered in the fireplace and must not project forward beyond the fireplace face.
The fireplace floor must also satisfy the installation requirements described in the G10 instructions.
Oxygen Depletion Sensor Safety Pilot
The G10 burner incorporates an Oxygen Depletion Sensor (ODS) safety pilot.
The supplied manufacturer information states that the ODS is designed to shut down the burner system before the available room oxygen level drops below the manufacturer's specified threshold.
ODS does not replace ventilation: Correct room sizing, combustion air, ventilation, installation, and maintenance requirements must still be followed.
Approved Fireplace Applications
The G10 installation manual identifies qualifying applications including:
Masonry Fireplace
Qualifying solid-fuel-burning masonry fireplace.
UL-127 Factory-Built Fireplace
Qualifying factory-built fireplace whose instructions permit the installation.
Listed Ventless Firebox
Listed ventless firebox enclosure that meets Real Fyre's requirements.
Do not install the burner in a factory-built fireplace whose instructions state that it has not been tested or should not be used with unvented burner systems.
Vent-Free & Vented Installation Capability
Vent-Free / Unvented
The G10 system is certified as an unvented room heater under ANSI Z21.11.2 when installed in a qualifying application according to manufacturer requirements.
Vented Decorative
The G10 system is also certified as a vented decorative appliance under ANSI Z21.60 when configured according to the manufacturer's applicable vented-installation requirements.
Local regulations matter: State and local codes can restrict or prohibit vent-free appliances. Verify the intended installation type before purchase.
Combustion Air & Room Requirements
A vent-free G10 installation must not be installed in a confined space unless adequate combustion and ventilation air is provided.
Real Fyre references the National Fuel Gas Code definition of an unconfined space as one providing at least 50 cubic feet of room volume for every 1,000 BTU/hr of the combined gas-appliance input in the space.
Room-sizing consideration: The G10-24/30 can operate at up to 37,000 BTU/hr. Other gas appliances in the same space must also be included when evaluating combustion-air requirements.
Unusually tight construction, altitude, and other installation conditions can require additional ventilation.
Important Installation Requirements
Qualified Installation
Installation and service must be performed by a qualified professional service technician.
Correct Fuel
The supplied gas must match the Natural Gas or Propane configuration shown on the rating plate.
No Field Conversion
Do not attempt to convert the burner between Natural Gas and Propane.
Approved Fireplace
A qualifying fireplace or listed ventless firebox enclosure is required.
Minimum Dimensions
The firebox must satisfy the manufacturer dimensions for the selected 24" or 30" log set.
Combustion Air
Adequate combustion and ventilation air must be provided for vent-free operation.
Important Operating Information
Supplemental Heating
Real Fyre identifies the G10 as a supplemental heating appliance rather than a primary heating source.
Attended Operation
Adults must be present while the burner is operating.
Do Not Leave Unattended
Do not leave the appliance burning unattended or while anyone is sleeping.
Glass Doors Fully Open
If fireplace glass doors are installed, they must remain fully open during vent-free operation.
Maintain Ventilation
Keep adequate combustion and ventilation air available whenever the appliance is operating.
Keep Combustibles Away
Keep combustible materials, gasoline, and flammable vapors or liquids away from the fireplace.
Maintenance & Annual Service
Regular cleaning and servicing are necessary for correct operation of the G10 burner and ODS pilot.
Annual Professional Inspection
The burner should be inspected and serviced by a qualified professional at least once per year.
Burner Ports
Keep burner ports clean and unobstructed.
ODS Pilot Openings
ODS pilot openings must remain clean for proper safety-system operation.
Air Openings
Keep operating air passages free from dust, lint, pet hair, and debris.
More frequent cleaning may be required when environmental conditions cause heavier buildup around the burner or ODS pilot.
Complete Real Fyre G10-24/30-15 Technical Specifications
| Brand |
Real Fyre |
| Manufacturer |
Real Fyre / Robert H. Peterson Co. |
| Series |
G10 |
| Model |
G10-24/30-15 |
| Product Type |
Gas Burner System |
| Burner Size |
24"/30" |
| Compatible Log Sizes |
24" or 30" |
| Control Type |
Variable Flame-Height Remote |
| Control Suffix |
-15 |
| Pilot Type |
Standing Pilot |
| Low Input |
19,000 BTU |
| High Input |
37,000 BTU |
| Fuel Availability |
Natural Gas or Propane Configurations |
| Field Fuel Conversion |
Not Permitted |
| Vent Type |
Vent-Free / Unvented |
| Safety Pilot |
Oxygen Depletion Sensor / ODS |
| Certification |
ANSI Z21.11.2 / ANSI Z21.60 |
| Log Set Included |
No – Required and Sold Separately |
| Included Decorative Media |
Lava Granules, Glowing Embers, Bryte Coals |
G10 Series Control Options
Real Fyre documentation identifies multiple control configurations within the broader G10 family.
| Control |
Configuration |
| Manual |
Manual burner control |
| -15 |
Remote variable flame-height control with standing pilot |
| -01V |
Remote variable flame-height control with electronic ignition and on-demand pilot |
This page is specifically for the G10-24/30-15. Do not assume that ignition and pilot characteristics from another G10 control option apply to this model.
Flame Authority Expert Recommendation
Choose the Real Fyre G10-24/30-15 when you want a vent-free-capable G10 burner with a traditional standing pilot and the convenience of remote variable flame-height adjustment.
Its 19,000–37,000 BTU operating range, ODS safety pilot, 24"/30" log compatibility, separate Natural Gas and Propane configurations, and multiple compatible ceramic refractory log styles make it a flexible option for qualifying fireplace installations.
The most important step before ordering is verifying the fireplace itself. Measure the front width, rear width, depth, and height, confirm whether a 24" or 30" G10 log set will fit, verify that the intended installation type is permitted, and order the burner for the correct fuel.
If you want electronic ignition instead of a standing pilot, this is not the correct control configuration; review the G10 -01V option instead.
Official Manufacturer Resources
Real Fyre Vent-Free Catalog
G10 Series configurations, compatible log styles, burner sizing, controls, fuel options, and general product information.
Real Fyre G10 Instructions Manual
Fireplace sizing, approved applications, combustion-air requirements, fuel configuration, ODS safety, operation, installation, maintenance, and service guidance.
Real Fyre G10-24/30-15 FAQs
What is the Real Fyre G10-24/30-15?
The G10-24/30-15 is a vent-free gas burner system designed for compatible 24" or 30" Real Fyre G10 ceramic refractory log sets. The -15 configuration uses a standing pilot with remote variable flame-height control.
Does the Real Fyre G10-24/30-15 include the logs?
No. A compatible 24" or 30" Real Fyre G10 log set is required and sold separately.
What size log set works with the G10-24/30-15?
The burner is designed for compatible 24-inch or 30-inch G10 log sets. Verify the fireplace dimensions before selecting the log size.
What is the BTU output of the G10-24/30-15?
The variable-flame configuration operates from approximately 19,000 BTU on low to 37,000 BTU on high.
What does the -15 suffix mean?
The -15 suffix identifies the variable flame-height remote control configuration with a standing pilot.
Does the G10-24/30-15 have electronic ignition?
No. The -15 configuration uses a standing pilot. The G10 -01V configuration uses electronic ignition with an on-demand pilot.
Is the G10-24/30-15 available for Natural Gas and Propane?
Yes. The burner is offered in dedicated Natural Gas and Propane configurations. Select the version that matches the fuel available at the installation location.
Can the G10 burner be converted from Natural Gas to Propane?
No. Field conversion is not permitted. The burner must be used only with the fuel type shown on its rating plate.
What fireplace size is required for a 24" G10 log set?
A 24" G10 configuration requires at least 28" front width, 20" rear width, 14" depth, and 17" height.
What fireplace size is required for a 30" G10 log set?
A 30" G10 configuration requires at least 34" front width, 20" rear width, 14" depth, and 17" height.
Does the G10-24/30-15 have an Oxygen Depletion Sensor?
Yes. The burner uses an ODS safety pilot designed to shut down the system before available oxygen falls below the manufacturer's specified operating threshold.
Can the G10-24/30-15 be installed in any fireplace?
No. It must be installed in a qualifying masonry fireplace, qualifying UL-127 factory-built fireplace, or listed ventless firebox enclosure that meets Real Fyre requirements.
Can the G10 be installed as a vented decorative appliance?
Yes. The G10 is certified as both an ANSI Z21.11.2 unvented room heater and ANSI Z21.60 vented decorative appliance when installed according to the manufacturer's applicable requirements.
Are vent-free burners permitted everywhere?
No. State and local codes can restrict or prohibit vent-free appliances. Verify the rules for the installation location before purchase or installation.
How much room volume does a vent-free G10 require?
The supplied instructions reference the National Fuel Gas Code definition of an unconfined space as at least 50 cubic feet of room volume for every 1,000 BTU/hr of combined gas-appliance input. Other appliances in the same space must also be considered.
Can the G10-24/30-15 be used as a primary heating system?
No. Real Fyre identifies the appliance for supplemental heating rather than as a primary heating source.
Can the G10-24/30-15 be left operating unattended?
No. Adults must be present while the burner is operating, and the manufacturer states that it should not be left burning unattended or while anyone is sleeping.
Can fireplace glass doors remain closed during operation?
No. If glass fireplace doors are installed, the supplied instructions require them to be fully open during vent-free operation.
How often should the G10 burner be serviced?
The burner should be inspected and serviced by a qualified professional at least once per year. More frequent cleaning may be necessary where dust, lint, pet hair, or debris accumulates.
Where can I find the installation instructions?
Before You Order
Confirm Before Purchase
- You specifically want the G10-24/30-15 standing-pilot configuration.
- You want remote variable flame-height adjustment.
- You have selected either a compatible 24" or 30" G10 log set separately.
- Your fireplace meets the minimum dimensions for that log size.
- Your fireplace is an installation type approved by Real Fyre.
- The selected burner fuel matches your Natural Gas or Propane supply.
- You understand that field fuel conversion is not permitted.
- Vent-free operation is permitted at the installation location if that configuration is intended.
- Adequate combustion and ventilation air can be provided.
- Qualified installation and annual service are planned.
Do Not Assume
- That the ceramic G10 log set is included.
- That the -15 model has electronic ignition.
- That 24" and 30" log sets require the same fireplace opening.
- That Natural Gas and Propane models can be field converted.
- That every factory-built fireplace accepts an unvented gas burner.
- That vent-free means no ventilation or combustion-air requirements.
- That the burner is intended as unattended primary heat.
- That fireplace glass doors may remain closed during vent-free operation.
Final planning check: Use the Real Fyre G10 Instructions Manual for fireplace sizing, approved fireplace applications, fuel requirements, combustion and ventilation air, ODS safety, vent-free and vented installation guidance, operation, maintenance, and service. Confirm that you want the -15 standing-pilot variable-flame configuration before ordering.
