Real Fyre G10 Charred Aged Split Gas Logs
Real Fyre 24" Charred Aged Split Gas Log Set – CHAS-24
The Real Fyre 24" Charred Aged Split Gas Log Set CHAS-24 recreates the character of naturally aged and charred split wood with detailed bark textures, realistic coloring, sculpted split surfaces, and a seven-piece refractory ceramic arrangement. Designed specifically for a compatible Peterson Real Fyre G10 burner system, the CHAS-24 combines traditional wood-fire styling with burner-specific log positioning for the intended flame presentation.
Model / SKU
CHAS-24
Nominal Size
24 Inches
Log Style
Charred Aged Split
Log Count
7 Pieces
Construction
Refractory Ceramic
Reinforcement
Steel Rods
Required Burner
Real Fyre G10
Burner Included
No
Important: Log Set Only – G10 Burner Required
The CHAS-24 includes the decorative seven-piece Charred Aged Split log set only. The compatible Peterson Real Fyre G10 burner shown in product imagery is not included and must be purchased separately.
Authentic Aged Split-Wood Styling for the Real Fyre G10 System
The CHAS-24 is designed for buyers who prefer the irregular character of aged, split firewood rather than a uniform decorative log appearance.
High-definition bark detailing, natural colors, split surfaces, and charred areas create the appearance of wood that has weathered and burned over time.
The seven refractory ceramic logs are designed to fit into a prescribed arrangement over a compatible G10 burner, helping maintain the spacing and positioning needed for the intended fireplace presentation.
Compatibility first: The CHAS-24 is not a universal gas-log replacement. Verify the G10 burner system, fireplace conditions, fuel configuration, and required log placement before ordering.
Real Fyre CHAS-24 at a Glance
Manufacturer
R.H. Peterson Co.
Product Type
Gas Fireplace Log Set
Log Style
Charred Aged Split
Log Configuration
7 Pieces
Construction
Refractory Ceramic
Required Burner
Peterson Real Fyre G10
Is the Real Fyre CHAS-24 Right for Your Fireplace?
Best For
- Buyers wanting a 24-inch aged split-wood appearance.
- Existing or planned Peterson Real Fyre G10 burner installations.
- Fireplaces where realistic bark and charred split surfaces are preferred.
- Buyers who understand that the burner and controls are selected separately.
- Installations where the manufacturer's prescribed seven-log arrangement can be followed.
- Natural Gas or Propane applications using the appropriate G10 burner configuration.
Consider Another Log Set If
- You do not have or plan to purchase a compatible Real Fyre G10 burner.
- You expect the burner to be included.
- You need a universal replacement gas-log set.
- You need a different Charred Aged Split size.
- You intend to use a non-approved burner system.
- You intend to rearrange the logs only for visual preference.
Why Choose the Real Fyre CHAS-24?
Charred Aged Split Styling
Split surfaces, natural bark texture, aged coloration, and charred detail recreate the appearance of weathered firewood.
Seven-Piece Arrangement
The 24-inch configuration uses seven individual logs positioned in a manufacturer-defined layout.
Refractory Ceramic Construction
The logs are made from refractory ceramic material designed to retain strength at fireplace temperatures.
Steel Reinforcement
Steel rods provide additional internal support within the ceramic logs.
Radiant Heat Retention
The heated refractory logs radiate heat during operation and continue releasing stored heat after shutdown.
Purpose-Built Positioning
Cutouts, tabs, and notches help align the logs correctly over the compatible G10 burner.
G10 Burner Compatibility Is Required
The CHAS-24 is designed for use only with a Peterson Real Fyre G10 burner system.
This is a required compatibility condition, not an optional recommendation. The manufacturer warns that using an unapproved burner can create unsafe operating conditions and may affect applicable listings and certifications.
Do not substitute another burner system. Confirm the compatible G10 burner and its fuel/control configuration before purchasing the CHAS-24.
What's Included?
Included
- Real Fyre 24" Charred Aged Split refractory ceramic log set.
- Seven decorative logs for the prescribed CHAS-24 arrangement.
Required Separately
- Compatible Peterson Real Fyre G10 burner system.
- Applicable G10 fuel configuration.
- Applicable burner controls and ignition system.
CHAS-24 Seven-Log Configuration
1. Rear Log
Forms the rear base of the arrangement.
2. Front Log
Forms the front base of the arrangement.
3. Left Middle Log
Fits into the prescribed left-middle position.
4. Right Middle Log
Fits into the prescribed right-middle position.
5. Center Top Log
Completes the central upper portion of the arrangement.
6. Outer-Left Middle Log
Positions on the outer-left side of the log stack.
7. Outer-Right Middle Log
Completes the outer-right side of the arrangement.
CHAS-24 Technical Specifications
| Brand |
Real Fyre |
| Manufacturer |
R.H. Peterson Co. |
| Model |
CHAS-24 |
| Product Type |
Gas Log Set |
| Log Style |
Charred Aged Split |
| Nominal Size |
24 Inches |
| Log Construction |
Refractory Ceramic |
| Log Count |
7 |
| Required Burner |
Peterson Real Fyre G10 |
| Burner Included |
No |
| Burner Style |
G10 Burner |
| Log Reinforcement |
Steel Rod Reinforcement |
| Available Series Sizes |
16/18", 24", 30" |
Specification distinction: Fuel type, BTU output, ignition, pilot system, remote operation, and other operating specifications belong to the compatible G10 burner—not the CHAS-24 ceramic logs themselves.
G10 Burner Control Options
The selected G10 burner configuration determines the operating controls.
| Control Configuration |
Operation |
| Manual |
Manual burner control |
| -15 |
Variable flame-height remote with standing pilot |
| -01V |
Variable flame-height remote with electronic ignition |
Control note: These operating controls are part of the compatible G10 burner system and are not included with the CHAS-24 log set.
Correct Log Placement Is Essential
The front and rear CHAS-24 logs form the base of the installation. Cutouts on the underside of these logs align with the burner and grate, and both lower logs must rest fully and flatly on the burner/grate.
The remaining five logs are then positioned in sequence so their shapes, tabs, and notches fit into their intended locations.
Correct Installation
- Seat the bottom logs fully on the burner/grate.
- Position the front and rear logs snugly against the main burner bracket.
- Install the five upper logs in the prescribed sequence.
- Maintain adequate spacing between all logs.
- Make sure every log remains stable.
- Periodically confirm that the arrangement has not shifted.
Do Not
- Estimate placement based on appearance alone.
- Create a custom log stack.
- Operate with unstable or partially seated logs.
- Allow flames to impinge directly on the logs.
- Add additional embers.
- Ignore ongoing soot accumulation.
Why Correct Log Placement Matters
Incorrect positioning can affect both the appearance and operation of the burner system.
Improper placement can contribute to flame impingement, incomplete combustion, soot, or excessive combustion by-products.
No flame impingement: When the CHAS-24 logs are correctly positioned, flames should not strike any portion of the logs.
If flame contact occurs, recheck the log arrangement and correct the placement according to the Real Fyre instructions.
Do Not Add Extra Embers
The manufacturer specifically states that additional embers should not be added to this installation.
Ember warning: Additional ember material can interfere with proper burner operation and may create an unsafe condition.
Soot & Combustion Guidance
Black carbon or soot can indicate incomplete combustion or incorrect log placement.
If Soot Develops on the Logs
Recheck the log arrangement and spacing against the manufacturer placement instructions.
If Soot Appears Outside the Firebox
Turn the unit off immediately and contact a qualified professional service technician.
If significant sooting continues: Stop using the gas log set until the cause has been corrected.
Hot Surface & Handling Precautions
The refractory ceramic logs remain hot after the burner has been turned off.
Burn hazard: Allow adequate cooling time before handling the CHAS-24 logs. Use appropriate heat-resistant gloves if repositioning is necessary.
Available Charred Aged Split Sizes
24" Charred Aged Split
Current Product – CHAS-24
View CHAS-24
Flame Authority Expert Recommendation
Choose the Real Fyre CHAS-24 when you want a 24-inch log set with the weathered, irregular appearance of naturally aged and charred split wood and already have or plan to purchase a compatible Peterson Real Fyre G10 burner.
Its seven-piece layout, refractory ceramic construction, steel reinforcement, split-wood texture, natural coloration, and burner-specific positioning make it well suited to buyers who want a traditional wood-fire appearance without using solid fuel.
The critical buying factor is compatibility. Confirm the G10 burner system, appropriate fuel configuration, control package, fireplace requirements, and prescribed CHAS-24 log placement before ordering.
Official Manufacturer Resources
Real Fyre Vent-Free Catalog
Charred Aged Split series sizing, G10 burner family information, control options, and general product details.
Charred Aged Split Log Set Instructions – CHAS-24
Manufacturer-prescribed seven-log arrangement, base-log alignment, spacing requirements, flame-impingement guidance, ember restrictions, and soot precautions.
Real Fyre G10 Instructions Manual
G10 burner installation, fuel configuration, controls, ODS safety, fireplace requirements, operation, service, and maintenance guidance.
Real Fyre CHAS-24 FAQs
What is the Real Fyre CHAS-24?
The CHAS-24 is a 24-inch Charred Aged Split seven-piece refractory ceramic gas log set designed for use with a compatible Peterson Real Fyre G10 burner system.
Does the Real Fyre CHAS-24 include the burner?
No. The CHAS-24 includes the decorative gas logs only. The compatible Peterson Real Fyre G10 burner system is required and sold separately.
What burner is required for the CHAS-24?
The CHAS-24 must be used with a Peterson Real Fyre G10 burner system. No alternative burner compatibility is established by the supplied product information.
Can I use CHAS-24 with a different gas burner?
No. Real Fyre specifies that the CHAS-24 logs are for use only with its G10 burner system.
How many logs are included with CHAS-24?
The 24-inch CHAS-24 configuration contains seven logs: front and rear base logs plus five additional middle and upper logs.
What are the CHAS-24 logs made from?
The logs are made from refractory ceramic and include steel rod reinforcement for added structural support.
Does CHAS-24 determine Natural Gas or Propane compatibility?
No. The decorative ceramic logs are not fuel-specific. Fuel type is determined by the compatible G10 burner configuration selected separately.
Does CHAS-24 include a remote control?
No. Any remote, valve, pilot, or electronic ignition functionality comes from the selected G10 burner system.
What G10 control options are listed for CHAS-24 compatibility?
The supplied product information lists manual control, -15 variable flame-height remote with standing pilot, and -01V variable flame-height remote with electronic ignition.
How should the CHAS-24 logs be positioned?
The bottom logs must be fully seated and aligned on the burner/grate, and the remaining five logs must be installed according to the manufacturer's prescribed seven-log arrangement.
Why is correct CHAS-24 log placement important?
Incorrect placement can cause flame impingement, improper combustion, soot, and excessive combustion by-products. The logs should remain securely positioned with adequate spacing.
Should the flames touch the CHAS-24 logs?
No. The supplied placement guidance states that correctly positioned logs should not be struck by the flames.
Can I add extra embers to CHAS-24?
No. Real Fyre specifically warns against adding additional embers to this installation.
What should I do if soot develops on the logs?
Recheck the log arrangement against the manufacturer placement instructions. Soot can indicate incomplete combustion or incorrect positioning.
What if significant soot continues?
Stop using the gas log system. If soot appears outside the firebox, turn the unit off immediately and contact a qualified professional service technician.
Do the CHAS-24 logs stay hot after use?
Yes. The refractory ceramic logs can remain hot after the burner is turned off. Allow adequate cooling time before handling them.
What other Charred Aged Split sizes are available?
The supplied product information identifies 16/18-inch, 24-inch, and 30-inch Charred Aged Split gas-log sizes.
Where can I find the CHAS-24 log placement instructions?
Before You Order
Confirm Before Purchase
- You specifically need the 24-inch CHAS-24 Charred Aged Split log set.
- You have or will purchase a compatible Peterson Real Fyre G10 burner.
- You understand that the burner is sold separately.
- You will select the G10 fuel configuration that matches your gas supply.
- You have selected the desired G10 control configuration separately.
- You can install all seven logs according to the Real Fyre placement instructions.
- You understand that flame impingement should not occur.
- You understand that additional ember material should not be added.
- Qualified professional installation and service are planned for the burner system.
Do Not Assume
- That the burner is included.
- That CHAS-24 works with any gas burner.
- That the ceramic logs determine fuel type.
- That the logs include remote or ignition controls.
- That the seven logs can be rearranged freely.
- That flame contact with the logs is acceptable.
- That extra embers can be added.
- That persistent soot is normal.
Final planning check: Use the Charred Aged Split placement instructions for the exact CHAS-24 seven-log arrangement and the G10 Instructions Manual for burner compatibility, fuel selection, controls, installation, operating requirements, service, and safety guidance.
