Real Fyre G10 Ceramic Refractory Gas Log Set
Real Fyre 24" Charred Frontier Oak Gas Log Set for G10 Burner – CHFR-24
The Real Fyre 24" Charred Frontier Oak Gas Log Set CHFR-24 is a seven-piece ceramic refractory log set designed specifically for compatible Peterson Real Fyre G10 burner systems. Detailed bark texture, natural coloration, charred surfaces, and the G10 Series' distinctive burnt-through front log create the appearance of naturally charred oak inside a gas fireplace.
Model / SKU
CHFR-24
Nominal Size
24 Inches
Log Style
Charred Frontier Oak
Log Count
7 Logs
Material
Ceramic Refractory
Compatible Burner
Real Fyre G10
Compatible Burner Size
G10-24/30
Burner Included
No
Important: Log Set Only – G10 Burner Required
The CHFR-24 is the ceramic log set only. The Peterson Real Fyre G10 burner shown in product imagery is not included and must be purchased separately.
Real Fyre specifies that this log set must be used only with a compatible Peterson Real Fyre G10 burner and associated parts.
Realistic Charred Oak Styling for the Real Fyre G10 Burner System
The Charred Frontier Oak design is intended for buyers who prefer the appearance of naturally burned oak rather than a clean, uniform log stack.
Deep bark texture, natural coloration, dark charred detailing, and the signature burnt-through front log give the CHFR-24 the appearance of an established wood fire.
When installed in the prescribed seven-log arrangement over a compatible G10 burner, openings through the log stack allow the intended flame pattern and ember-bed presentation to remain visible.
Compatibility first: CHFR-24 is not a universal replacement gas-log set. Confirm the burner series, burner size, fireplace dimensions, fuel configuration, and prescribed log placement before ordering.
Real Fyre CHFR-24 at a Glance
Manufacturer
Robert H. Peterson Co.
Product Type
Gas Fireplace Log Set
Style
Charred Frontier Oak
Compatible Burner
Peterson Real Fyre G10
Is the Real Fyre CHFR-24 Right for Your Fireplace?
Best For
- Buyers needing a 24-inch Charred Frontier Oak log set.
- Existing or planned Peterson Real Fyre G10 burner systems.
- Fireplaces where a realistic charred-oak appearance is preferred.
- Buyers who like the G10 Series' burnt-through front-log styling.
- Compatible Natural Gas or Propane G10 burner configurations.
- Fireplaces that meet the G10-24/30 minimum dimensions for a 24" log set.
- Buyers who understand that controls and ignition come from the separate G10 burner system.
Consider Another Log Set If
- You do not have or plan to purchase a compatible Real Fyre G10 burner.
- You need a universal replacement gas log set.
- You need a 16/18" or 30" Charred Frontier Oak size.
- Your fireplace does not meet the minimum G10 dimensions.
- You expect the burner, valve, ignition system, or remote to be included with the logs.
- You intend to rearrange the logs outside the manufacturer-prescribed layout.
Why Choose the Real Fyre CHFR-24?
Charred Frontier Oak Styling
Defined bark texture, natural coloration, charred surfaces, and a burnt-through front log create a realistic burned-oak appearance.
Ceramic Refractory Construction
The logs are made from refractory ceramic material designed for the high-temperature environment of a gas fireplace.
Reinforced Construction
The supplied product information states that steel rods are incorporated into the logs for added reinforcement.
Seven-Log Arrangement
The CHFR-24 uses a manufacturer-prescribed seven-log layout with specific bottom, middle, center-top, and outer-log positions.
Visible Flame Openings
Intentional spacing through the prescribed log arrangement helps preserve the intended flame pattern.
Radiant Heat
The refractory ceramic logs radiate heat during operation and continue releasing stored heat for a period after shutdown.
G10 Burner Compatibility Is Required
The CHFR-24 must be used with a Peterson Real Fyre G10 burner system.
Do not substitute another burner. The supplied manufacturer information warns that improper burner/log combinations can result in improper combustion, soot, property damage, personal injury, or invalidation of applicable manufacturer listings and certifications.
Before ordering, verify all of the following:
- You need the 24" CHFR-24 log set.
- Your burner is or will be a compatible Real Fyre G10 system.
- The burner is purchased separately.
- The separately selected burner matches the installation fuel type.
- The fireplace meets the applicable G10 installation requirements.
- The logs can be installed in the manufacturer's prescribed CHFR-24 arrangement.
Real Fyre CHFR-24 Specifications
| Brand |
Real Fyre |
| Manufacturer |
Robert H. Peterson Co. |
| Model / SKU |
CHFR-24 |
| Series |
G10 |
| Product Type |
Gas Fireplace Log Set |
| Log Style |
Charred Frontier Oak |
| Nominal Size |
24 Inches |
| Log Material |
Ceramic Refractory |
| Log Configuration |
7 Logs |
| Compatible Burner |
Peterson Real Fyre G10 |
| Compatible G10 Burner Size |
G10-24/30 |
| Burner Included |
No |
| G10 Fuel Options |
Natural Gas or Propane |
| G10 BTU Range with 24" Log Set |
19,000–37,000 BTU* |
| Available Charred Frontier Oak Sizes |
16/18", 24", 30" |
BTU clarification: The BTU rating belongs to the compatible G10 burner system, not to the ceramic CHFR-24 logs independently. The supplied G10 specifications identify a 19,000 BTU low setting and 37,000 BTU high setting for compatible variable-flame configurations used with the 24" log set.
G10 Burner Control Options
The CHFR-24 logs do not contain their own valve, ignition system, or remote. Those operating features depend on the separately purchased G10 burner/control configuration.
| Control Configuration |
Operation |
| Manual |
Manual burner control |
| -12 |
On/Off remote with standing pilot |
| -15 |
Variable flame-height remote with standing pilot |
| -01V |
Variable flame-height remote with electronic ignition |
Buying note: Purchasing CHFR-24 alone does not provide remote-control, ignition, pilot, or flame-adjustment functionality. Those features are determined by the separate G10 burner system.
Minimum Fireplace Size for the 24" CHFR-24
When CHFR-24 is used with the compatible G10-24/30 burner, the fireplace must meet the manufacturer's minimum dimensions for the 24-inch log configuration.
| Minimum Front Width Opening |
28" |
| Minimum Rear Width |
20" |
| Minimum Depth |
14" |
| Minimum Height |
17" |
Measure before ordering: Minimum fireplace dimensions must be observed. The compatible G10 burner should also be centered in the fireplace to provide appropriate clearance for operation and servicing.
Compatible G10 Fireplace Applications
The compatible G10 burner system is designed for qualifying fireplace applications identified in the manufacturer instructions.
Masonry Fireplace
A qualifying solid-fuel-burning masonry fireplace.
UL-127 Factory-Built Fireplace
A qualifying factory-built fireplace whose instructions permit the installation.
Listed Ventless Firebox
A listed ventless firebox enclosure where permitted by the manufacturer and applicable requirements.
Do not install the compatible G10 burner in a factory-built fireplace whose instructions state that it has not been tested or should not be used with unvented burner systems.
Vented & Vent-Free G10 Application
The compatible G10 burner system is design certified as an ANSI Z21.11.2 unvented room heater and as an ANSI Z21.60 vented decorative appliance.
The appropriate installation configuration depends on the fireplace, the G10 burner/control system selected, manufacturer requirements, and applicable state or local rules.
CHFR-24 Seven-Log Placement
Real Fyre provides a prescribed placement sequence for the Charred Frontier Oak logs. The CHFR-24 uses seven individual logs, and each log has a specific position.
1. Rear Log
Placed on the grate and slid forward against the main burner bracket. Underside cutouts align over the grate fingers.
2. Front Log
Placed on the grate and slid backward against the main burner bracket. It must rest flat on the burner/grate.
3. Left Middle Log
Positioned over the lower logs in its prescribed locking location.
4. Right Middle Log
Positioned over the lower logs on the opposite side.
5. Center Top Log
Placed in its designated position over the logs below.
6. Outer-Left Middle Log
Locks into the prescribed position on the left side of the arrangement.
7. Outer-Right Middle Log
Completes the prescribed seven-log layout on the opposite side.
Do not rearrange the logs simply for appearance. The prescribed arrangement is part of the intended operating configuration of the G10 burner/log system.
Proper Log Positioning Is Critical
Incorrect log placement can cause flame impingement, incomplete combustion, soot, and excessive combustion by-products.
After Installation
- Make sure every log is properly and firmly seated.
- Make sure the lower logs are fully seated on the burner/grate.
- Keep the front and rear logs snug against the main burner bracket.
- Maintain the prescribed spacing between logs.
- Periodically verify the logs remain stable and correctly positioned.
- Recheck the manufacturer placement instructions if any log moves.
Do Not
- Rearrange the logs for appearance.
- Allow logs to sit loosely or incorrectly on the grate.
- Operate with obvious flame impingement.
- Continue use if significant soot develops.
- Add extra embers to the prescribed configuration.
Correct operation: When properly positioned, the supplied instructions state that there should be no flame impingement on the logs.
Important CHFR-24 Safety Information
Do Not Add Extra Embers
Real Fyre specifically warns against adding additional embers to the prescribed installation.
Watch for Soot
Black carbon or soot can indicate incomplete combustion or incorrect log positioning.
Avoid Flame Impingement
Flames should not strike the logs when the prescribed arrangement is installed correctly.
Allow Logs to Cool
Ceramic logs remain hot after burner operation. Allow adequate cooling time before handling.
Qualified Installation
Installation and service of the G10 burner system should be performed by qualified professional personnel.
Check Position Regularly
Periodically verify the logs remain properly seated and stable.
If soot appears outside the firebox: Turn the unit off immediately and contact a qualified professional service technician. Do not continue operating the system.
G10 Oxygen Depletion Sensor & Ventilation
When the compatible G10 burner is operated as an unvented gas-fired heater, it uses combustion air from the room and requires adequate combustion and ventilation air.
The G10 burner incorporates an Oxygen Depletion Sensor (ODS) safety pilot. The manufacturer documentation states that the ODS is designed to shut down the burner before room oxygen drops below the specified operating level.
Attended appliance: Real Fyre identifies the G10 as an attended appliance. Adults must be present while it is operating, and it should not be left burning unattended or while anyone is sleeping.
Available Charred Frontier Oak Sizes
24" Charred Frontier Oak
Current Product – CHFR-24
View CHFR-24
Flame Authority Expert Recommendation
Choose the Real Fyre CHFR-24 when you already have or are planning a compatible G10-24/30 burner and want a realistic, heavily charred oak appearance with the G10 Series' distinctive burnt-through front log.
The most important buying decision is compatibility. The CHFR-24 is not a universal replacement log set, and it should not be selected based on appearance or nominal fireplace width alone.
Before ordering, verify the G10 burner series, 24-inch log size, minimum 28" front width, 20" rear width, 14" depth, 17" height, correct burner fuel configuration, and prescribed seven-log placement.
Official Manufacturer Resources
Real Fyre Vent-Free Catalog
G10 Series log styles, available sizes, burner configurations, and product information.
Charred Frontier Oak & Charred Aged Split Log Placement Instructions
Manufacturer-prescribed CHFR-24 seven-log arrangement, positioning details, and safety guidance.
Real Fyre G10 Instructions Manual
Compatible burner installation, fireplace sizing, fuel requirements, ventilation, ODS safety information, operation, and service guidance.
Real Fyre CHFR-24 FAQs
Does the Real Fyre CHFR-24 include the G10 burner?
No. CHFR-24 is the 24" Charred Frontier Oak ceramic log set only. The compatible Peterson Real Fyre G10 burner is sold separately.
What burner works with the Real Fyre CHFR-24?
Use CHFR-24 only with a compatible Peterson Real Fyre G10 burner system. Do not substitute another burner.
Is the CHFR-24 a universal replacement gas log set?
No. CHFR-24 is specifically designed for the Real Fyre G10 system and requires the manufacturer's prescribed log arrangement.
How many logs are included with the Real Fyre CHFR-24?
The CHFR-24 uses seven ceramic refractory logs. Each log has a specific position in the prescribed arrangement.
What are the CHFR-24 logs made from?
The logs are made from ceramic refractory material. The supplied product information also states that steel rods provide internal reinforcement.
Can the CHFR-24 be used with Natural Gas or Propane?
The compatible G10 burner system is available in separate Natural Gas and Propane configurations. Fuel type is determined by the burner, not by the ceramic CHFR-24 logs.
Can a G10 burner be converted from Natural Gas to Propane or vice versa?
No. The G10 manual states that the appliance must be used with the gas type shown on its rating plate and that field conversion is not permitted.
Does the CHFR-24 include a remote control?
No. Remote, ignition, pilot, and flame-control functionality depend on the separately purchased G10 burner/control configuration.
What G10 control options are available?
The supplied product information identifies manual control, -12 On/Off remote with standing pilot, -15 variable flame-height remote with standing pilot, and -01V variable flame-height remote with electronic ignition.
What size fireplace is required for the CHFR-24?
The G10-24/30 burner with a 24" log set requires a minimum 28" front opening, 20" rear width, 14" depth, and 17" height.
How many BTUs does the CHFR-24 produce?
The ceramic logs do not produce a separate BTU rating. Heat output comes from the compatible G10 burner, which is rated up to 37,000 BTU for the 24" G10-24/30 configuration, with a 19,000 BTU low setting on compatible variable-flame controls.
Is the CHFR-24 vented or vent-free?
The CHFR-24 is designed for the G10 system. The compatible G10 burner is certified for both unvented room-heater and vented decorative-appliance applications when installed according to manufacturer and local requirements.
Can I rearrange the CHFR-24 logs?
No. Do not rearrange the logs outside the manufacturer-prescribed layout. Incorrect positioning can cause flame impingement, improper combustion, and soot.
Do the bottom CHFR-24 logs need a specific position?
Yes. The bottom logs must be fully seated on the burner/grate, and the front and rear logs must remain snug against the main burner bracket.
Can the flames touch the CHFR-24 logs?
No. The supplied placement guidance states that when the logs are correctly positioned there should be no flame impingement on the logs.
Can I add extra embers?
No. Real Fyre specifically warns not to add additional embers because doing so can cause unsafe operation.
Why are the CHFR-24 logs developing black soot?
Black soot can indicate incomplete combustion. Recheck the prescribed log placement and stop using the set if significant sooting continues.
What should I do if soot appears outside the firebox?
Turn the unit off immediately and contact a qualified professional service technician. Do not continue operating the system.
Can I reposition the logs immediately after shutting off the burner?
No. The ceramic logs remain hot after operation. Allow adequate cooling time before handling or use appropriate heat-resistant gloves when repositioning is necessary.
Can the compatible G10 burner be left running while I sleep?
No. Real Fyre identifies the G10 as an attended appliance. Adults must be present during operation, and the burner should not be left running unattended or while anyone is sleeping.
Who should install the Real Fyre G10 burner system?
Installation and service should be performed by a qualified professional service technician, service agency, or gas supplier according to manufacturer instructions and applicable requirements.
What sizes are available in Charred Frontier Oak?
The supplied product information identifies 16/18", 24", and 30" Charred Frontier Oak sizes. This page is for the 24" CHFR-24.
Where can I find the correct CHFR-24 log placement instructions?
Before You Order
Confirm Before Purchase
- You need the 24" Charred Frontier Oak CHFR-24 log set.
- You have or will purchase a compatible Real Fyre G10 burner system.
- You understand that the burner is sold separately.
- The G10 burner is the correct factory fuel configuration for your installation.
- The fireplace meets the 28" front × 20" rear × 14" depth × 17" height minimum.
- The fireplace is an approved application for the G10 burner.
- You can install the seven logs exactly as prescribed.
- Qualified burner installation and service are planned.
Do Not Assume
- That CHFR-24 works with any gas burner.
- That the burner is included.
- That the log set determines Natural Gas or Propane compatibility.
- That the G10 burner can be field converted between fuels.
- That the logs can be rearranged for a different appearance.
- That adding extra embers is permitted.
- That visible soot is normal.
- That physical log size alone confirms fireplace compatibility.
Final planning check: Use the Charred Frontier Oak placement instructions for the exact CHFR-24 seven-log arrangement, the G10 Instructions Manual for burner installation, fireplace sizing, fuel, ODS, ventilation, and operating requirements, and the Real Fyre Vent-Free Catalog for G10 sizing and product-family reference.
